50mm crank pulley lock
Honda-Tech Member
Joined: Oct 2001
Posts: 4,611
Likes: 3
From: Severn, MD
Re: 50mm crank pulley lock (accordredliner)
Assuming that you're talking about the crank pulley holder (so you can get the crank pulley bolt out), you can get the one made by Moroso or there are several variations - I think toolwarehouse.com may have.
Joined: Mar 2004
Posts: 5
Likes: 0
From: Pasig City, MM, Philippines
Re: 50mm crank pulley lock (EE_Chris)
Amazon have these kind of tools and the cheapest, I think.
here's one:
http://www.amazon.com/exec/obi...&st=*
here's one:
http://www.amazon.com/exec/obi...&st=*
Joined: Mar 2004
Posts: 5
Likes: 0
From: Pasig City, MM, Philippines
Re: 50mm crank pulley lock (R81-00-DC2)
I got some stuff and books from amazon.
Never pissed me off so far.
You can use an half inch breaker bar on the above model for leverage.
Here's one from SIR Tools but quite expensive.
http://images.amazon.com/image..._.jpg
Never pissed me off so far.
You can use an half inch breaker bar on the above model for leverage.
Here's one from SIR Tools but quite expensive.
http://images.amazon.com/image..._.jpg
Thread
Thread Starter
Forum
Replies
Last Post
