i rebuilt my ls tranny and swapped some good gsr internals over from a broken gsr tranny that had a huge hole in the casing. now every gear goes in while im driving but second doesnt, unless im making right turns. ...driving straight even if i double clutch it wont even get the damn thing in gear....i know for a fact its not a syncro problem because it goes in smooth (only making right turns) im thinking its my alignment becuase my car pulls slightly and my steering wheel is a little crooked so i have to hold it to make it drive straight. or my passenger axle is bad... my linkage is good. and i just flushed the tranny twice with honda MTF.... my 3 mounts have polyurathene inserts and theyre tightened. and btw this is a stock b20 on a del sol...........

im going to get an alignment soon... i think that may be the problem...

as i think about it though, before i overhauled the tranny 2nd gear was no problem..... possibility a bent fork inside?

anyone here experienced this???


Modified by alphaquake at 7:31 PM 6/25/2005

 

that's a really weird problem...

it doesn't sound like the shift fork is the problem, but something is definitely binding in there. maybe a dumb question, but are you running axles that are the correct length?

-tony

 

they are actually the same axles i was using


Modified by alphaquake at 11:45 PM 6/24/2005

 

bump


Modified by alphaquake at 12:20 PM 6/25/2005

 

B U iVl P

 

bump,,,


ahh

 

ahhh forget it