What 12v trigger wire can be used when putting the 044 in the front engine bay in between the filter and rail. Will be using a relay . Will this work with a walbro 400 or 450lpm in the tank? Since the walbro will be pushing faster than the 044 pulling ??

 

No one done this before??

 

Depends on the power you are pushing 1walbro 400 should be enough.

If you want run a 320 plus 044 but it's kinda over kill. I don't know your fuel or power level but there are a lot of options for fuel pumping. Z


As for your trigger you can pull it from the top of your oem pump hanger. Then wire it to a big relay

 

I'm planning to run e85 and make over 500hp.