[HELP] EM1 with B18C swap ECU problems
Thread Starter
Honda-Tech Member
Joined: May 2011
Posts: 21
Likes: 0
From: Woodbridge, VA
[HELP] EM1 with B18C swap ECU problems
My ECU (P72) has power, but the CEL will not illuminate on start up and it is not recognized by my scanner tool.
The car is having issues with rough idle and stalling at start, so I wanted to check if it was throwing codes. That is when I discovered the ECU malfunctioning. Any help would be great.
The car is having issues with rough idle and stalling at start, so I wanted to check if it was throwing codes. That is when I discovered the ECU malfunctioning. Any help would be great.
Thread
Thread Starter
Forum
Replies
Last Post