Ive got the function 7 lca's on my eh2(eg6), and im putting a gs-r rear anti-roll bar(sway) on. upon attching the endlinks to the lca's, there are 3 holes in which to attach the endlinks too. If i get the adjustable endlinks, what is the difference on where you place the endlinks too ?

 

given the same adjusted length it would be stiffness or the arb rate.

 

which setting would be the stiffest and which wouldn't ?

 

The softest setting is the inside, center is closest to stock, and the outside is the "hardest".

 

Thanks @!

 

The holes are marked: H = hard, M = medium (closest to stock), S = soft.

The stiffness changes by about 10% going from hole to hole (i.e. each step).