D2 Coilover Install ..... in progress
Thread Starter
Joined: Apr 2002
Posts: 918
Likes: 0
From: Richmond, B.C., Canada
D2 Coilover Install ..... in progress
hey guys, got my d2 coilovers (rears) on the CRX, but I totally forgot about the nut thats usually tack welded onto the back of the OEM shock (for the LCA-shock through bolt). Since D2 didn't pack a replacement nut, will any strength nut do just as well for replacement?
TIA!
TIA!
Honda-Tech Member
Joined: Mar 2004
Posts: 2,972
Likes: 0
From: IL, USA
Re: D2 Coilover Install ..... in progress (crxmadman)
If you don't find out what to use (I'm not sure either), I went to my local Honda parts dept. and picked up the proper part per Honda OEM.
Joined: May 2005
Posts: 60
Likes: 0
From: Valdosta, Ga, USA
Re: D2 Coilover Install ..... in progress (Noob4life)
take the stock bolt, go to Napa, and get the red bolt that is the same size and two nuts...put it on use the second nut as a safe for it backing off
Thread
Thread Starter
Forum
Replies
Last Post
ej888
Honda Civic / Del Sol (1992 - 2000)
4
Jun 7, 2010 08:06 AM
