k i just finished a b18b1 swap on my EK coupe and im getting a ton of ABS codes. Some of them from the rear and i havent even touched the rear brakes.

So here are the codes im getting.
-right rear wheel sensor (open/short to body ground or short to power
-right rear wheel sensor (electrical noise or intermittent interruption.
-left rear wheel sensor (electrical noise or intermittent interruption
-right front inlet solenoid
-right front outlet solenoid
-left front inlet solenoid
-left front outlet solenoid
-right rear inlet solenoid
-right rear outlet solenoid
-left rear inlet solenoid
-left rear outlet solenoid
-fail safe relay
-low ignition voltage

anyone have an idea why im getting all these codes? I didnt even touch the rear of the car.

 

could be in your harness check all of your wiring. you could have disrupted something during the swap

 

im thinking maybe the ground wire is in the wrong place or something cause i never touched the rear end of the car and all i did was clean up the engine bay wiring by tucking it a bit etc etc.

 

ttt