Do you know what axles can I use for the JDM ITR 36mm hub cause Autozone sells the usdm axles which is 32mm and not the JDM Type r. Please I need to know.

Can I swap the USDM ITR hub which is 32mm to a JDM ITR suspension that comes with a 36mm, would it fit with no problems.

 

yea need to go to a place where they make axles and tell them to put the prelude/accord 36mm end instead of the 32mm on a regular integra axle.

that what a buddy of mine did.

you COULD change the hub but that would be costly.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SilverDc2 &raquo;</TD></TR><TR><TD CLASS="quote">you COULD change the hub but that would be costly.</TD></TR></TABLE>

Which pretty much defeats the purpose of buying a 5-lug. You could have bought regular Integra knuckles and have the USDM ITR hub pressed in and buy ITR calipers. I would go with the axles deal, much cheaper.

 

Another question if a have a JDM type R with a 36mm hub and the wheel bearing got f up what wheel bearing can I use that will fit with the 36mm hub ?

 

I believe a 97-01 CRV wheel bearing will work