IACV issue
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2009
Location: SoCal-Victorville
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
IACV issue
I have a 97 hatch with a "Mini-Me" swap in it that I need to smog(Star smog). I bought the car this way and its been really reliable so far(I had it for a year now). I need to smog this car and I thought by putting the stock pcm back in it would be fine. Apparently the p28 that is in is tuned to make it run cause when I put the stock pcm in I have a Cel for IACV circuit. I did a little digging and found that it was a 3 wire made to a 2 wire IACV. So the orange signal wire is not even attached to anything.
The p28 has an adapter harness that it plugs into to work but I guess it is not hooked up to OBDII port.
Is there a way around this ?
The p28 has an adapter harness that it plugs into to work but I guess it is not hooked up to OBDII port.
Is there a way around this ?
#6
Honda-Tech Member
Thread Starter
Join Date: Jan 2009
Location: SoCal-Victorville
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Jan 2009
Location: SoCal-Victorville
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Re: IACV issue
I would have to wire vtec to that ecu ? If I brought my car to you could you do this for me(I would obviusly pay) ? How long would it take ? How much are the parts ?
#10
Honda-Tech Member
Thread Starter
Join Date: Jan 2009
Location: SoCal-Victorville
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Re: IACV issue
Yes Vtec is already wired in and its running on a p28 ecu. It runs good with no problems and I get great mpg(37-41mpg hwy).
Last edited by Daz-E; 04-07-2013 at 04:50 PM.
#12
Honda-Tech Member
Thread Starter
Join Date: Jan 2009
Location: SoCal-Victorville
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Re: IACV issue
ok then we just need to wire the knock sensor. email me headsortailsmotors@gmail.com
#13
Honda-Tech Member
Thread Starter
Join Date: Jan 2009
Location: SoCal-Victorville
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Re: IACV issue
Ok ! I purchased the p2p, knock sensor, and installed a new used Cat. Just need to wire up the knock sensor and potentiometer(for the fuel pressure sensor). I should be ready for smog in a day or 2.
Thread
Thread Starter
Forum
Replies
Last Post
IDriveHonda
Honda Civic / Del Sol (1992 - 2000)
7
04-13-2008 06:13 PM
igo4bmx
Honda Civic / Del Sol (1992 - 2000)
8
05-28-2004 03:26 AM