i have a 1990 hatch with a d16y8 motor

i am going to be installing my dsm 450 CC injectors and am wondering first off what do i need and second how to do it

i have a harness with clips and resistor box and everything the only wires comming out of the harness are (blue,brown,yellow,red) everything else it plug and play
i will be running an OBD1 computer but the engine harness and injectors that are in there now are from an obd0

can someone please help me out THANKS~!

 

is the car turbo

 

yes my car is turbo
i have an uberdata chipped ECU that i used a obd0 to obd1 conversion harness on

and now i just need the injectors

 

https://honda-tech.com/zerothread?id=517274

https://honda-tech.com/zerothread?id=230698

 

thanks for the links but they dont show how to install them

i already have the resistor box in my car because its a 90 so

and when they talk about boring out wat exactly gets bored out and where is that located

 

actually this one here explains it pretty well
https://honda-tech.com/zerothread?id=230698

 

that one exlplains how to put them in

i need to know how to wire the harness and clipss

 

OBD0 injector clips plug into the DSM injectors without any mods. What is your current chassis setup?

 

its an EF hatch wioth a d16 y8 motor in it

computer im running is a p28 ( used obd0 to obd1 conversion harness)

so your saying my DSM injectors will plug right into my current injector harness thats in my car right now and even though im running an obd1 computer it will stioll work?

ps i have the resistor box in the car already (came with it)

 

bump

 

they will just plug in

 

that makes my day