I'm thinking about building my block. I got this block and it came with a messed up timing belt tenetioner threads stripped.

Anyway that was a while back, I want to see if this block is savlageable for building up.

I think thinking of using scat rods and ftr's pistsons.

Let me know what yall think about the pictures

 

yuk, I donno man...

 

Worse comes to Worse the block is fine to build, but i dunno about the crank, someone else chime in?

 

i assume i should have the walls honed atleast? I'm about to go see if I can still see the hatch marks. btw whats wrong with the crank? I have a digital caliper if I need to take some readings with it.

 

Get the block honed or get your own dingle berry hone and do it yourself to clean it up. The crank doesn't have any big scraps on it. I would get it measured to see if it's still in specs. late

 

the block looks like a good hone could clean it up, the crank i would measured and see if it ok, then get it micro polished

 

ditto....

 

thanks guys

 

i'd micropolish the crank...tank, bore, hone, deck the block, and get that hole fixed with a TIMESERT, **** a helicoil, they suckass

 

Looks like a micropolish would fix the crank but you might find that rust a little deeper than surface rust. Might need a .5mm bore.