The question here is a JUN vs TODA! I am preparing to build an LS VTEC and I am not sure which cams to go with! I have been looking at the TODA C's and the JUN stage III; and I noticed the JUN's have more duration while the TODA's have more lift! Give me some advice on which I should choose!

 

There is a tremendous amount of information and discussions regarding cams here.

 

B A N and S E A R C H

 

I wouldn't buy JUN or TODA anyday.

BC Spec 3+

 

What is so good about Buddy Club Spec III? What are the specs on the cams?

 

They were rated best street cams, give nice power and torque

EDIT: How can i forget?? Fat *** midrange!!

Their's a thread on all-mtr board, lists plenty of info, some dyno charts, and general info

 

torque smorck,hehe i want mid to top end power,how much of the time are you actually under 3 to 4 g's of rpm(or wherever torque is supposed to be)..think about it once you get going your in the upper rev range the whole race pretty much..what do you doods think..o ya sorry to use your thread dood..i like toda but i havnt researched the other cams completly so i cant judge.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by spaceman &raquo;</TD></TR><TR><TD CLASS="quote">torque smorck,hehe i want mid to top end power,how much of the time are you actually under 3 to 4 g's of rpm(or wherever torque is supposed to be)..think about it once you get going your in the upper rev range the whole race pretty much..what do you doods think..o ya sorry to use your thread dood..i like toda but i havnt researched the other cams completly so i cant judge.</TD></TR></TABLE>

You will use it(lowend) if you autocross or race on road courses!

 

And what compression will this setup be running on? Hope it's high enough to support the bigger cams.

 

Still in the planning stages of the build! So as of now I want to be in the 12.0:-12.5:1 compression area! So will surely support bigger cams!

 

My question isnt really which cams should I use; but what is a more determining factor of performance for cams, lift or duration?

 

excellent question,i would like to know this as well..

 

TTT

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eyeamvic &raquo;</TD></TR><TR><TD CLASS="quote">And what compression will this setup be running on? Hope it's high enough to support the bigger cams.</TD></TR></TABLE>

Like it is said, best STREET cam. Says it is best for 10.9-13.1 compression. People put down impressive #'s with these cams.

 

I'll have to do some resarch on those cams! Thanx!