I have two sets of universal style floor mounts for racing seats, that bolt to the floor and provide appropriate mounting for a variety of race seats. These were used with a pair of Recaros but can be adapted to different styles of slider or side bracket.



Only $30 plus shipping for both pairs

Kirk

 

Will they fit a DC integra?

 

They are made to mount by bolting through any flat floor surface.

K

 

Can you explain how you would mount a seat (ie sparco, kirkey) and what the single bent tab is for?

I have a CRX with an pretty uneven floor, and I'm just trying to figure out if I can make use of the mounts.

Thanks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Another Drew &raquo;</TD></TR><TR><TD CLASS="quote">Can you explain how you would mount a seat (ie sparco, kirkey) and what the single bent tab is for?

I have a CRX with an pretty uneven floor, and I'm just trying to figure out if I can make use of the mounts.

Thanks</TD></TR></TABLE>

I could be wrong, but that "single bent tab" looks like a seatbelt mount. Otherwise, I do not believe these will fit in the tub of a CRX without a BFH or even a grinder. It's a tight space.

 

I think Travis is right on about the tab. When we put brackets in the floor of our old RX7, we made spacers to fill up a couple of gaps and create a level surface for mounting.

K

 

Ack! Sale at this price ended...

I just discovered that these are TC Kline's custom Bimmer e36/e46/m3 mounting brackets that retail for $139 a PAIR. Helloooo, eBay - here I come!

K

 

If I'd known that, I would have held onto them

 

Damnit - why did I pass them on to rj? I could have just "misplaced" them

 

Woo-hoo! BMW owners ROCK - they just sold on eBay for $140. Ka-ching...

K

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Knestis &raquo;</TD></TR><TR><TD CLASS="quote">Only $30 plus shipping for both pairs</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Knestis &raquo;</TD></TR><TR><TD CLASS="quote">they just sold on eBay for $140.</TD></TR></TABLE>

So, uh, how's $35 shipped sound? Okay, fine, $40.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Another Drew &raquo;</TD></TR><TR><TD CLASS="quote">

I have a CRX with an pretty uneven floor, and I'm just trying to figure out if I can make use of the mounts.

Thanks</TD></TR></TABLE>
When I put a Sparco Evo 2 in the CRX it took an air jig saw, a die grinder, a sledge hammer (to move metal to make a flatter floor) and two people eight hours per (hmmm, math=16hours) to make the #@*&%*!! side mount floor brackets fit. That is just the way it is with that car.
Barry H.