FS: Rear Strut - Trunk Brace
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Aug 2002
Posts: 3,235
Likes: 1
From: Margaritaville, AZ, US
FS: Rear Strut - Trunk Brace
***SOLD***
This is 4 point brace that mounts to factory threaded holes in the floor and strut tower of any gen 3 integra. It combines the benefits of a rear strut tower brace with a trunk floor brace and then goes a step further and triangulates both braces. Made of 1" mild steel and weighs in at under 10lbs. Comes with all the brackets and hardware needed for a simple installation. You could mount this in 5 minutes if you have air tools. Took me about 15 minutes to mount with a simple socket wrench and two sockets (14mm and 17mm).
Asking $175.
I bought this from Reno Racing and was the guinea pig for test fitment on the EG hatchback....as you can see it doesn't fit my chassis.
Modified by BlueTeg at 9:19 AM 9/13/2004
This is 4 point brace that mounts to factory threaded holes in the floor and strut tower of any gen 3 integra. It combines the benefits of a rear strut tower brace with a trunk floor brace and then goes a step further and triangulates both braces. Made of 1" mild steel and weighs in at under 10lbs. Comes with all the brackets and hardware needed for a simple installation. You could mount this in 5 minutes if you have air tools. Took me about 15 minutes to mount with a simple socket wrench and two sockets (14mm and 17mm).
Asking $175.
I bought this from Reno Racing and was the guinea pig for test fitment on the EG hatchback....as you can see it doesn't fit my chassis.
Modified by BlueTeg at 9:19 AM 9/13/2004
Trending Topics
Very Emergency!!
Joined: Dec 2003
Posts: 3,666
Likes: 0
From: ....Things Just Getting Good..... Reno, NV
Re: FS: Rear Strut - Trunk Brace (IntegraBoy04)
it fits dc2 chassis integras. that is my car in the pic. the fitment into a dc2 chassis is perfect. i think the seller has an EG and it didn't fit.
edit: you should buy it from him, great deal. one of a kind bar. greatly enhances chassis stiffness.
edit: you should buy it from him, great deal. one of a kind bar. greatly enhances chassis stiffness.
Thread Starter
Honda-Tech Member
iTrader: (2)
Joined: Aug 2002
Posts: 3,235
Likes: 1
From: Margaritaville, AZ, US
Re: FS: Rear Strut - Trunk Brace (Booyakasha)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Booyakasha »</TD></TR><TR><TD CLASS="quote">it fits dc2 chassis integras. that is my car in the pic. the fitment into a dc2 chassis is perfect. i think the seller has an EG and it didn't fit.
</TD></TR></TABLE>
That is correct.
It will fit the DC chassis.
It will NOT fit the EG hatch.
Just by eyeballing it on my brother's car, I would suspect that it fits the EK coupes.
Booyakasha and his partner (RenoRacing) are actually the guys that fab these things. Great piece of kit.....just need them to make one that fits the EG hatch!!
</TD></TR></TABLE>
That is correct.
It will fit the DC chassis.
It will NOT fit the EG hatch.
Just by eyeballing it on my brother's car, I would suspect that it fits the EK coupes.
Booyakasha and his partner (RenoRacing) are actually the guys that fab these things. Great piece of kit.....just need them to make one that fits the EG hatch!!
