low ballers: sol parts, gsr head, ls block
Sol Parts
Invader rear bumper. B/O
Invader side skirts - B/O
License plate panel - B/O
Tail lights - B/O
Targa top (interior panel needs replaced) - B/O
Radio/shifter consol - black - B/O
Arm rest/storage consol (no ash tray) - black - B/O
Open to offers on any of these parts, I need to get them out. All parts are in good condition, no cracks or scratches. Bigger parts are for pick up only. Body panels are yellow.
94 b18c head, reciently rebuilt with new valve guides, seals and 3 angle valve job and decked. includes valves, springs and cams (assembled). Doesn't inlcude dizzy, manifold, injectors, cam gears or sensors. $450
255 lphv fuel pump, fairly new only around 3k on it. I forget what brand it is but I bought it from Jackson racing. $55
I also have a b18a1 motor. It was rebuilt with the head. New bearings, seals, rings, milled + honed and had a block guard installed. Only problem is that it was stored outside (covered) and some moister must of got in the #1 cylinder and caused some surface rust in the bore. It might be able to be just wiped clean or you can just do a quick hone on it and clean it up. Still turn over easly and looks good except for the one cylinder. Open to offers. Pick up only






Invader rear bumper. B/O
Invader side skirts - B/O
License plate panel - B/O
Tail lights - B/O
Targa top (interior panel needs replaced) - B/O
Radio/shifter consol - black - B/O
Arm rest/storage consol (no ash tray) - black - B/O
Open to offers on any of these parts, I need to get them out. All parts are in good condition, no cracks or scratches. Bigger parts are for pick up only. Body panels are yellow.
94 b18c head, reciently rebuilt with new valve guides, seals and 3 angle valve job and decked. includes valves, springs and cams (assembled). Doesn't inlcude dizzy, manifold, injectors, cam gears or sensors. $450
255 lphv fuel pump, fairly new only around 3k on it. I forget what brand it is but I bought it from Jackson racing. $55
I also have a b18a1 motor. It was rebuilt with the head. New bearings, seals, rings, milled + honed and had a block guard installed. Only problem is that it was stored outside (covered) and some moister must of got in the #1 cylinder and caused some surface rust in the bore. It might be able to be just wiped clean or you can just do a quick hone on it and clean it up. Still turn over easly and looks good except for the one cylinder. Open to offers. Pick up only
The site is temp under maintenance. They should be back up soon, if not I'll repost them. Thanks
The fuel pump comes with ever thing in the pic. Sending unit, strainer, ect.
The fuel pump comes with ever thing in the pic. Sending unit, strainer, ect.
Trending Topics
hey do u have msn messenger or aim? if so how can i contact u because my pm's dont work too good, and im interested in that gsr head, thanks
Thread
Thread Starter
Forum
Replies
Last Post



