FS: Crower 401 GSR cams
Thread Starter
Honda-Tech Member
Joined: Nov 2003
Posts: 620
Likes: 0
From: Pre filtration, OR
FS: Crower 401 GSR cams
I am selling these for a friend of mine, I do have them in my posession so if you have any questions or concerns please direct them to me!
These cams were used roughly 1500 miles, ran in a JDM GSR and they made a big increase in power into VTEC. They are in mint condition. They are a Stage 1 cam.
These cams are for those of you that want to retain your stock springs and retainers and not have to worry about the idling issues/fuel tuning that comes with a Stage 2 or higher cam
Dyno's have shown upto 15hp increase from these cams, they have the same profile as a set of CTR cams.
Here are some quotes from Crowers website-
Stage 1 - Street Use, CTR+ profile. Will work with Type-R valve springs. rpm range idle to 7800+. (12-15 hp).
Thanks
Nick
These cams were used roughly 1500 miles, ran in a JDM GSR and they made a big increase in power into VTEC. They are in mint condition. They are a Stage 1 cam.
These cams are for those of you that want to retain your stock springs and retainers and not have to worry about the idling issues/fuel tuning that comes with a Stage 2 or higher cam
Dyno's have shown upto 15hp increase from these cams, they have the same profile as a set of CTR cams.
Here are some quotes from Crowers website-
Stage 1 - Street Use, CTR+ profile. Will work with Type-R valve springs. rpm range idle to 7800+. (12-15 hp).
Thanks
Nick
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
