ran the r today
car went 13.5 @101 w/ 1.96 ft
im a bit disappointed... car was in full street trim "full interior" open header, sunoco 104 and 22inch slicks...
car made 207 to the wheels a week prior to running at the track... threw 310 injectors in this morning and did a little bid of "road tuning.. im sure it was running a little fat on the top end because im sure the car can trap a little higher.. next time out the car goes on a diet and will do some more dyno tuning.
im a bit disappointed... car was in full street trim "full interior" open header, sunoco 104 and 22inch slicks...
car made 207 to the wheels a week prior to running at the track... threw 310 injectors in this morning and did a little bid of "road tuning.. im sure it was running a little fat on the top end because im sure the car can trap a little higher.. next time out the car goes on a diet and will do some more dyno tuning.
13.5 with slicks sucks considering you have 207 whp.
whats the point of this post?
thats like me saying i took 50th place in a 50 person marathon when using riods.
13.5 = stock r times w/ slicks.
whats the point of this post?
thats like me saying i took 50th place in a 50 person marathon when using riods.
13.5 = stock r times w/ slicks.
13.5 is weak... car needs a good tune and a diet.. on a 1.9 60 ft the car should have done alot better... but then again im running stock suspension as well... and as i said earlier... the car is running rich on the top end..
and i posted cus i felt like it.... you didnt have to read it or reply to it... so do me a favor and have a nice warm cup of shut the **** up!
and i posted cus i felt like it.... you didnt have to read it or reply to it... so do me a favor and have a nice warm cup of shut the **** up!
launching anywhere from 5500 to 6000 1.9 60ft isnt to bad considering im running stock suspension... i pulled a 1.8 as well but the time was slower...
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by w@@t w@@t »</TD></TR><TR><TD CLASS="quote">13.5 with slicks sucks considering you have 207 whp.
whats the point of this post?
thats like me saying i took 50th place in a 50 person marathon when using riods.
13.5 = stock r times w/ slicks.
</TD></TR></TABLE>
Show me the stock type r that runs 13.5 with slicks.....
No need to be such an *******
whats the point of this post?
thats like me saying i took 50th place in a 50 person marathon when using riods.
13.5 = stock r times w/ slicks.
</TD></TR></TABLE>
Show me the stock type r that runs 13.5 with slicks.....
No need to be such an *******
Trending Topics
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by xmilanoredsix »</TD></TR><TR><TD CLASS="quote">
Show me the stock type r that runs 13.5 with slicks.....
No need to be such an *******
</TD></TR></TABLE>
https://honda-tech.com/zeroforum?id=36
these guys will tell you how to run 13.5 with slicks.
Show me the stock type r that runs 13.5 with slicks.....
No need to be such an *******
</TD></TR></TABLE>https://honda-tech.com/zeroforum?id=36
these guys will tell you how to run 13.5 with slicks.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by w@@t w@@t »</TD></TR><TR><TD CLASS="quote">13.5 with slicks sucks considering you have 207 whp.
whats the point of this post?
thats like me saying i took 50th place in a 50 person marathon when using riods.
13.5 = stock r times w/ slicks.
</TD></TR></TABLE>
ease off pal, seems like someone pissed you off. there are many useless post and this isn't so be easy.
keep it up man decent times, need more practice and tuning since you swapped to 310cc
whats the point of this post?
thats like me saying i took 50th place in a 50 person marathon when using riods.
13.5 = stock r times w/ slicks.
</TD></TR></TABLE>
ease off pal, seems like someone pissed you off. there are many useless post and this isn't so be easy.
keep it up man decent times, need more practice and tuning since you swapped to 310cc
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by w@@t w@@t »</TD></TR><TR><TD CLASS="quote">
https://honda-tech.com/zeroforum?id=36
these guys will tell you how to run 13.5 with slicks.</TD></TR></TABLE>
Telling me that the drag race forum will teach me to do it is a lot different then it actually happening, I highly doubt that a stock type R could hit 13.5 with slicks, shaving a full second of its stock quarter mile time.
I would think with the number of posts that you have that you would have some more knowledgeable comments......guess not...
https://honda-tech.com/zeroforum?id=36
these guys will tell you how to run 13.5 with slicks.</TD></TR></TABLE>
Telling me that the drag race forum will teach me to do it is a lot different then it actually happening, I highly doubt that a stock type R could hit 13.5 with slicks, shaving a full second of its stock quarter mile time.
I would think with the number of posts that you have that you would have some more knowledgeable comments......guess not...
im figuring its running really rich up top... cuz it would come out of the hole hard.. car goes back to the dyno monday... lean and mean soon to come
car made 230whp 162 tq prior to me owning the car.... the car use to belong to alaskanassassin on here.. my late brother.. im just trying to get the car into the 12's cus he never got to run the beast after the motor build up
car made 230whp 162 tq prior to me owning the car.... the car use to belong to alaskanassassin on here.. my late brother.. im just trying to get the car into the 12's cus he never got to run the beast after the motor build up
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by w@@t w@@t »</TD></TR><TR><TD CLASS="quote">awesome. you belong in the special olympics.</TD></TR></TABLE>
ok this was funny
.........but give the guy a break
ok this was funny
.........but give the guy a break
Thread
Thread Starter
Forum
Replies
Last Post
ringgold
Drag Racing
5
Apr 17, 2006 04:37 AM
eddiecut
Drag Racing
80
Dec 23, 2002 01:31 PM



