Anyone interested in fabricating a bracket to hold my Mcmaster vaccuum manifold to my firewall for me? Could use any G3 Integra for sizing. I would like to have it between the fuel filter and throttle cable bracket area as shown in pic.


Zip ties suck

 

zip ties do NOT suck, sir

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bailhatch &raquo;</TD></TR><TR><TD CLASS="quote">zip ties do NOT suck, sir </TD></TR></TABLE>

i agree zip ties does wonders...

 

yes yes but they dont look professional. I would like a bracket.

 

ok fine, brackets don't suck either. sheesh

 

go to home depot, buy a 90 deg metal bracket in the wood section. trim it to fit, drill holes, bolt it on. done

 

The head of the bolts will stick out that holds the fuel filter and other bracket to the firewall. i wont have a flat surface to mount the manifold to.

 

Im using my Mcmaster Carr vacuum manifold for an oil manifold. I tapped those holes that are in the block already and just bought some flat aluminum stock from Home Depot and used that for the bracket. Mounted it to the firewall.

 

i usually just put small screws and drill into the firewall.