How much is the civic rpm tach off by? I know my fuel cut is at 7600 but when i was doing a burn out at the track, it was up between 8000-8500rpm and no cutoff....I have Hondata and its set to cut off at 7600rpm.

slicks are 22x8x15 and 60' are 1.7-1.8




Modified by 93H22ACX at 10:20 AM 8/9/2004

 

The tach is off about 12-15%.

 

what are you shifting at? so that means i've been shifting at 6600rpm or so then?

 

When we took my friend EG (with EX cluster) to the dyno, the tach was off by like ~400 RPM (it was reading higher then the engine was actually turning). Give or take a few rpms.

 

thanks! so i'll be shifting at 8k on the tack then

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93H22ACX &raquo;</TD></TR><TR><TD CLASS="quote">thanks! so i'll be shifting at 8k on the tack then</TD></TR></TABLE>

When Darkknight[dmd] went to the track, he ran his best time and MPH shifting at 7700 (on stock tach). You really only have pistons on him (your intake/exhaust track is almost the same).


I make the car run consistent, then **** with the settings. You will see what works best for you.


BTW, You have new H22a EG in your area, so watch yourself

 

yeah as of right now...its consistant 13.2@101 and 102.

what do you mean watch myself? My car looks ugly so no one gives me a second look hahaha

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93H22ACX &raquo;</TD></TR><TR><TD CLASS="quote">what do you mean watch myself? My car looks ugly so no one gives me a second look hahaha</TD></TR></TABLE>

So does this car

I got it running this weekend , sooo.......

(joking on the watching thing)

 

is Darkknight[dmd] from GA also?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93H22ACX &raquo;</TD></TR><TR><TD CLASS="quote">is Darkknight[dmd] from GA also?</TD></TR></TABLE>

No, he is from south FL. We are doing his car, hoping for 200-210 whp on uberdata.

 

thats good! btw...what kind of headers does he have? Mine's NOPI headers

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93H22ACX &raquo;</TD></TR><TR><TD CLASS="quote">thats good! btw...what kind of headers does he have? Mine's NOPI headers </TD></TR></TABLE>

I run AN-r and like the power they make, but the build is ok. I tried to install a imgine eng. header, but we had clearance issues. I think is was just a bad one, Going to see what they have to say about it.

Darkknight has a EK EX, his weight is 2710-2770 with driver, needless to say, his car is not light.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbogixxer &raquo;</TD></TR><TR><TD CLASS="quote">

I run AN-r and like the power they make, but the build is ok. I tried to install a imgine eng. header, but we had clearance issues. I think is was just a bad one, Going to see what they have to say about it.

Darkknight has a EK EX, his weight is 2710-2770 with driver, needless to say, his car is not light. </TD></TR></TABLE>

good times on a heavy *** car! your AN-R header give you enough air flow on topend? mine feels like its out of breath....i mean it takes forever to hit redline in 4th.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93H22ACX &raquo;</TD></TR><TR><TD CLASS="quote">good times on a heavy *** car!</TD></TR></TABLE>

Yeah, weighed 2710 after all the runs (with driver). The fastest run, I shifted early in first gear (14.1 @97.66), so, I may have hit a low low 14 or maybe 13s. I am sure it would have hit mid 98 or so. That would make it well into the 200WHP range.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93H22ACX &raquo;</TD></TR><TR><TD CLASS="quote">your AN-R header give you enough air flow on topend?</TD></TR></TABLE>

It does not ran out of stream, I have it on two H22a (civic) and they are very rev happy. One has balance shafts on, the other car does not.

 

do you know what the conversion factor is for racing 1200ft above sea-level compared to 0ft-500ft?

i wanna come run down there also

 

13.03@102.3 at sea level (with the run in your sig)

http://www.smokemup.com/auto_m...s.php

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93H22ACX &raquo;</TD></TR><TR><TD CLASS="quote">i wanna come run down there also </TD></TR></TABLE>


Come down, moroso is almost always open.

 

any events coming up? I'll will be running in Mongomery, AL in Nov...why dont you guys come up too...

I am going to really try to make it down there!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93H22ACX &raquo;</TD></TR><TR><TD CLASS="quote">any events coming up?</TD></TR></TABLE>

NOPi this weekend

That is a far drive for us (GA)

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93H22ACX &raquo;</TD></TR><TR><TD CLASS="quote">any events coming up? I'll will be running in Mongomery, AL in Nov...why dont you guys come up too...

</TD></TR></TABLE>

Ya, Ill be running there too.

Bee, why didn't you just check the computer screen while Ed was tuning to check the RPMs?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93H22ACX &raquo;</TD></TR><TR><TD CLASS="quote">
what do you mean watch myself? My car looks ugly so no one gives me a second look hahaha</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by turbogixxer &raquo;</TD></TR><TR><TD CLASS="quote">
So does this car
</TD></TR></TABLE>


hahaha, **** you man.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RotiEatter &raquo;</TD></TR><TR><TD CLASS="quote">

Ya, Ill be running there too.

Bee, why didn't you just check the computer screen while Ed was tuning to check the RPMs?

</TD></TR></TABLE>

too excited and didnt take that into consideration

who is this by the way?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RotiEatter &raquo;</TD></TR><TR><TD CLASS="quote">


hahaha, **** you man. </TD></TR></TABLE>

who are you talking about or to?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 93H22ACX &raquo;</TD></TR><TR><TD CLASS="quote">

who are you talking about or to?</TD></TR></TABLE>

he's talking to turbogixxer. roti's civic is the h22a/eg he got running over the weekend.

by the way...

Are you two sausage smokers done having this conversation about your tach and mph yet?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DarkKnight[DMD &raquo;</TD></TR><TR><TD CLASS="quote">]

he's talking to turbogixxer. roti's civic is the h22a/eg he got running over the weekend.

by the way...

Are you two sausage smokers done having this conversation about your tach and mph yet? </TD></TR></TABLE>

HAHAHAHAHAH

yes we are! hey we might coming down this weekend to race at NOPI. hope you guys make it!

Damn gas is going to be expensive! its like a 11-12 hour drive for us.

if we make it, we'll be in a gold eg hatch running in the turbo4 class along with some buddies of ours (street stuff) which will be running in the comp4 class.

see you there (hopefully if i dont have to freaking work )