OK, I think my ignition coil may be bad, or might just be the wire???, thinking about just getting a blaster coil, how would i wire this up???, and what would i do with the plug that normally goes to my factory coil, any1 help???

 

If you have a stock internal coil you need to extend the wires out to the external coil and run a coil wire to the dizzy cap.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vteckilla7 &raquo;</TD></TR><TR><TD CLASS="quote"> OK, I think my ignition coil may be bad, or might just be the wire???, thinking about just getting a blaster coil, how would i wire this up???, and what would i do with the plug that normally goes to my factory coil, any1 help???</TD></TR></TABLE>

If you have an external coil like the 97-01 ludes, all you need to do is wire all the +wires to the +terminal on the coil, and the rest of the wires to the - terminal. Get a current meter and test the wires, any that show current will be connected to the +terminal.