Right handed drive teg
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VTECteg94 »</TD></TR><TR><TD CLASS="quote">If ne one knows where i could find a right hand drive teg let me know thanks
</TD></TR></TABLE>
Your best bet is to get a shell. It's hard to find a rhd teg in the states.
</TD></TR></TABLE>
Your best bet is to get a shell. It's hard to find a rhd teg in the states.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Havoc3119 »</TD></TR><TR><TD CLASS="quote">japan</TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Havoc3119 »</TD></TR><TR><TD CLASS="quote">japan</TD></TR></TABLE>
wonder if they like left hand drive tegs
wonder if they like left hand drive tegs
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mugenx83 »</TD></TR><TR><TD CLASS="quote">
wonder if they like left hand drive tegs</TD></TR></TABLE>
haha
check this out
http://www.batfa.com/
wonder if they like left hand drive tegs</TD></TR></TABLE>
haha
check this out
http://www.batfa.com/
Trending Topics
so what exactly are the legalities behind importing jdm cars here? If it were so easy I dont see why almost everyone wouldnt be shipping over 12,500 dollar jdm itrs.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VTECteg94 »</TD></TR><TR><TD CLASS="quote">i was but if it takes it 7-9k to make it street legal then nm haha ...</TD></TR></TABLE>
I think thats just a myth.... Im sure its not that hard.
I think thats just a myth.... Im sure its not that hard.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VTECteg94 »</TD></TR><TR><TD CLASS="quote">i was but if it takes it 7-9k to make it street legal then nm haha ...</TD></TR></TABLE>
well if you find one here int he states, you wont have to worry about it.. theres someone i've seen that has a... ****, i dont know what color is its, some champaigne color.. G2 XSI.. looks clean
well if you find one here int he states, you wont have to worry about it.. theres someone i've seen that has a... ****, i dont know what color is its, some champaigne color.. G2 XSI.. looks clean
Go to J-garage.com they import and export all sorts of cars. They can for sure get you an Integra. Good Luck man!!!!!!!!
For the Lazyhttp://www.j-garage.com
For the Lazyhttp://www.j-garage.com
Guest
Posts: n/a
If you are in the US :
This is information about importing the JDM car into the US.
As you may know, all the Japanese specifications vehicles (JDM car) are Right Hand Drive. Unfortunately, it is difficult to import JDM cars into the US at present except the 25 years or older model. It is because you have to obtain the approval from the DOT and the EPA in order to import the JDM car and it needs to legalize a car when it will reach to the US port.
Let me advise you that unless you wish to present crash test data for any Right Hand Drive car, it cannot legally be imported to the US. This is prohibitively expensive as a vehicle must be crashed to obtain the data, and we do not support the crash test data. Also the JDM car probably do not meet the US emission standard. And after 1996 models probably need to install the OBD2 system in order to pass the emission standard.
For your information, here is a link of the US importing information.
EPA : http://www.epa.gov/otaq/imports/quikover.htm
DOT : http://www.nhtsa.dot.gov/cars/rules/import/
US customs : http://www.customs.ustreas.gov/xp/cgov/import/
NOTE : We J's Garage Export do not support any import procedure. The buyer is responsible for any necessary procedures, or any transfers, or any modifications for them to import the car.
This is information about importing the JDM car into the US.
As you may know, all the Japanese specifications vehicles (JDM car) are Right Hand Drive. Unfortunately, it is difficult to import JDM cars into the US at present except the 25 years or older model. It is because you have to obtain the approval from the DOT and the EPA in order to import the JDM car and it needs to legalize a car when it will reach to the US port.
Let me advise you that unless you wish to present crash test data for any Right Hand Drive car, it cannot legally be imported to the US. This is prohibitively expensive as a vehicle must be crashed to obtain the data, and we do not support the crash test data. Also the JDM car probably do not meet the US emission standard. And after 1996 models probably need to install the OBD2 system in order to pass the emission standard.
For your information, here is a link of the US importing information.
EPA : http://www.epa.gov/otaq/imports/quikover.htm
DOT : http://www.nhtsa.dot.gov/cars/rules/import/
US customs : http://www.customs.ustreas.gov/xp/cgov/import/
NOTE : We J's Garage Export do not support any import procedure. The buyer is responsible for any necessary procedures, or any transfers, or any modifications for them to import the car.
http://www.jarcoinc.com they have jdm half cuts with the dash so you can do a rhd conversion
http://www.batfa.com/usedvehicles-honda-stock.html . they have honda and acura.
You want a rhd teg? It will take two months, four gs and another person to come and pic it up. Get ahold of these guys service@automotive-advantage.com or
360-708-1618 and talk to JOSE. Peace
360-708-1618 and talk to JOSE. Peace
http://www.batfa.com
had a friend buy a 89 Skyline GTS for like 3500 and had it shipped over here for like 900 and the local DMV stamped a vin on it. But we live in east texas i think he knew that guy at the DMV....
-veg
had a friend buy a 89 Skyline GTS for like 3500 and had it shipped over here for like 900 and the local DMV stamped a vin on it. But we live in east texas i think he knew that guy at the DMV....
-veg



