i broke the damn pcv valve trying to take it off now its half cracked, how would i take it out now, its really hard to take it out

my car is a 1990 integra LS

 

dont stress, i was looking at the pcv valve and was like oh **** tahts the valve ppl bitch about so i went to grab the hose and clank the vlave broke into 2 peices

what i did was use a small visegrip and keep pulling on it and turning a tad

took 15mins tho...
it should come out

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by importdude2000 &raquo;</TD></TR><TR><TD CLASS="quote">dont stress, i was looking at the pcv valve and was like oh **** tahts the valve ppl bitch about so i went to grab the hose and clank the vlave broke into 2 peices

what i did was use a small visegrip and keep pulling on it and turning a tad

took 15mins tho...
it should come out</TD></TR></TABLE>

well now the thing broke off more, now its deep in there, now what am i gonna do, i cant drive my car. im so pissed, and i lost the new pcv valve somewhere in the engine bay and i cant find it now

 

well i drove my car with it off for 3-4 miles to kragen~

vise grip Near the bottom so it has grip
dont vise on the weak part near the bend

 

i have a b16a so i don't know if it's the same set-up but i broke my pcv valve the other day also. what i did was unhook the hose running from the pcv valve connecting to my stock black oil catch can behind my motor. i pulled the hose out downwards away from the intake mani. after that i just picked out the rest of the pcv valve with a little flat head making sure that i didn't crack or rip the hose surrounding the pcv valve. hope that helps.........