1. what do you do with all the brake lines that are on the fire wall.
2. when you get all the wires lengthened and what not do you hide them under the intake manifold or do you run one wire loom behind the tranny and into the cabin.

any help would be appreciated i am about to do this to my car.

 

its an ancient chinese secret

 

Ask JDM_JON, he is the master of making engine bays ridiculously simple and clean

 

cool thanks

 

ancient chinese secret huh?

 

why would it be a big secret?who cares.is there a way i can hide my turbo , maybe behind my fender?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by espanol &raquo;</TD></TR><TR><TD CLASS="quote">why would it be a big secret?who cares.is there a way i can hide my turbo , maybe behind my fender? </TD></TR></TABLE>

It's how he makes a living.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rodrez &raquo;</TD></TR><TR><TD CLASS="quote">It's how he makes a living. </TD></TR></TABLE>

"jingle bells"

 

What does he charge for work like yours ek four?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Gump &raquo;</TD></TR><TR><TD CLASS="quote">What does he charge for work like yours ek four?</TD></TR></TABLE>

every car verys....

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ek four &raquo;</TD></TR><TR><TD CLASS="quote">

every car verys....</TD></TR></TABLE>

He hooked me up really good, very happy with the work that was done for me.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rodrez &raquo;</TD></TR><TR><TD CLASS="quote">He hooked me up really good, very happy with the work that was done for me. </TD></TR></TABLE>

jon paid ME to do my car ... haha

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by rodrez &raquo;</TD></TR><TR><TD CLASS="quote">He hooked me up really good, very happy with the work that was done for me. </TD></TR></TABLE>You have recent pic's of yours Rodrez?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Gump &raquo;</TD></TR><TR><TD CLASS="quote">You have recent pic's of yours Rodrez?</TD></TR></TABLE>

http://www.skafia.com/myPix/-Rodrez--549897027.jpg

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b16a ferio &raquo;</TD></TR><TR><TD CLASS="quote">Ask JDM_JON, he is the master of making engine bays ridiculously simple and clean </TD></TR></TABLE>

yea like rodrez said , he does it for a living , i doubt hes gonna tell you . **** i wouldnt tell either

there are a few different ways you can do it , just be creative . get urself a soldering gun , solder , **** load of wire , electircal tape , wire loom and lots of time !

 

hide some in the frame rail along the side

 

 

If you got about 15-20 hours of spare time on your hands you could always do what i did. made my own harness. now i just gotta wait for the new motor to get done and it'll be in the bay. all hidden and u wont see a damn thing




\


Here is my engine bay as it stands right now tho i think its pretty clean

 

I should do this to my 240sx.. I havnt seen it done yet.

 

anybody in norcal doing this?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b16a ferio &raquo;</TD></TR><TR><TD CLASS="quote">Ask JDM_JON, he is the master of making engine bays ridiculously simple and clean </TD></TR></TABLE>
ive seen pics of his work..its flawless..