Does any one know if the 5 lug will fit onto the d series axles. This is from an 01 integra type r. I got the d16y7 still

 

up

 

If it's the JDM five lug, no it won't. 36mm > 32mm

 

you can get ti to work by getting custom axles made

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92b16vx &raquo;</TD></TR><TR><TD CLASS="quote">If it's the JDM five lug, no it won't. 36mm &gt; 32mm</TD></TR></TABLE>

To clarify,

There are 2 "JDM five lug". An EK9 5 lug will work, but a 98spec DC2R will not.

Furthermore, a JDM 2001 Type R is the DC5R. The last year of the DC2R in Japan is 2000. So it has to be a USDM Type R.


Modified by Mario at 4:00 PM 7/11/2004

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mario &raquo;</TD></TR><TR><TD CLASS="quote">

To clarify,

There are 2 "JDM five lug". An EK9 5 lug will work, but a 98spec DC2R will not.
</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by wdskuk &raquo;</TD></TR><TR><TD CLASS="quote"> This is from an 01 integra type r. I got the d16y7 still</TD></TR></TABLE>

I know that, I can also read

 

What about the older type r 4 lug 4x114 setup? Would that work with a sohc setup? It's easier to find and cheaper plus you get a pretty good selection of JDM rims with that pattern.

 

i have ek9 5 lug on my d16y8

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by egizzle6 &raquo;</TD></TR><TR><TD CLASS="quote">What about the older type r 4 lug 4x114 setup? Would that work with a sohc setup? It's easier to find and cheaper plus you get a pretty good selection of JDM rims with that pattern. </TD></TR></TABLE>
Yes, that will work.