crx with b18a1

Reply Subscribe

Thread Tools

Search this Thread

Jun 17, 2004 | 02:52 PM

one8toh8

Thread Starter

Junior Member

Joined: Jun 2004

Posts: 380

Likes: 0

From: PORT ST LUCIE, Florida, USA

crx with b18a1 need help with some parts

I have a 89 crx si and it has a 90 integra ls b18a1 motor in it and, I am just wondering if anyone has done this and if they did, what axels where used? Also what throttle cable,and clutch cables where used?

Modified by one8toh8 at 1:10 AM 6/18/2004

Jun 17, 2004 | 07:28 PM

VTECVillain

Honda-Tech Member

Joined: Dec 2001

Posts: 4,052

Likes: 3

Re: crx with b18a1 need help with some parts (one8toh8)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by one8toh8 »</TD></TR><TR><TD CLASS="quote">I have a 89 crx si and it has a 90 integra ls b18a1 motor in it and, I am just wondering if anyone has done this and if they did, what axels where used? Also what throttle cable,and clutch cables where used?</TD></TR></TABLE>

I have a 91 CRX with a 96 B18B1 which is just a revision of the B18A1. For driveshafts I'm using the 90-93 Integra intermediate shaft and axles. I'm using a 88-91 CRX Si throttle cable and clutch cable.
You can use the Integra throttle cable and clutch cable as well. Also you can use 94-01 Integra axles as long as you use a matching int. shaft. You will then have to replace the driver's side tranny seal to a 94-01 Integra also.