Notices
Vehicles for sale Post vehicles for sale only

1998 LS with JDM ITR front end- lots of extra parts and great susupension!!

Thread Tools
 
Search this Thread
 
Old Jun 12, 2004 | 04:46 PM
  #1  
advanracing62's Avatar
Thread Starter
Honda-Tech Member
 
Joined: May 2001
Posts: 2,244
Likes: 0
From: Boise, ID
Default 1998 LS with JDM ITR front end- lots of extra parts and great susupension!!

as always if you have any ? or anything IM or email me...


The car does have a salvage title- Theft recovery actually, there was no body damage, wiring damage, or water damage to the vehicle. This was merely stolen and had the parts removed, I have replaced everything that looked bad… even things that looked ok got replaced. This includes the wiring, and suspension. the only things stolen from the car were front sheet metal, engine, and interior. As you can see it's all been replaced. I have been told that when you register it in your state that the title will be clear. I have confirmed this with a local auto dealer- so the title will show clear when you title in your state.

I initially was going to keep the car for myself, but due to some life changes I have to sell her. She’s a great car and is a joy to drive. The CRVT really makes this car come alive, and it’s faster than the ITR due to the bigger motor. The suspension is top notch, combined with the roll bar and the front strut bar- she’s stiff. Throw on the Kuhmo’s and you’re ready for any auto cross race. You can always slide the sun roof open and take her out for a nice sunny drive, get her to stretch her legs, she’s a super drive!!!



Suspension:

Zeal S6 suspension- aluminum body shocks with Endless super light coils

Carbing 4 pt. Strut bar

Kirk Racing 4 pt. Roll bar

JDM ITR rear lower control arms

Urethane bushings at shock mount points



Tires/Wheels:

Kuhmo Victoracers with GSR hammer wheels (94 style) 205-50-15

Falken Azenis on 15” steel wheels 205-50-15

Buddy club ultra light racing lugs



Body:

OEM metal JDM ITR front end conversion (non HID)

Wings West rear OEM JDM ITR lip

Mugen side skirts

Shaved moldings and wing holes



Motor:

B20 VTEC

NEW OBD II distributor

B&M FPR

B&M Fuel Gauge

JUN ultra light fly wheel

ACT clutch

Magnacore wires

Custom race header by 10-94 motorsports

JDM ITR tranny 4.70 final

Kaaz LSD

Big bore throttle body

AEM intake

Ported and polished GSR head- matched with Skunk 2 manifold

Balanced bottom end

Chamfered oil holes on crank

Fresh OEM Honda bearings

Spoon thermostat

Spoon thermoswitch

Spoon radiator cap

ITR valves

ITR springs/retainers

ITR oil pump

Balanced clutch and flywheel assembly

Custom 2.5” exhaust with ES oval muffler

RMS spark plugs- dynoed +5 whp and +3 ftlb just from these plugs!

OBD II to OBD I conversion harness

P28 chipped with custom program

Hondata- I’m just missing the power plug that solders into the ECM



Interior:

JDM ITR air bag block off tray

JDM ITR clock block off

MOMO steering wheel

Tekniques anti-theft steering wheel hub- keyed removable steering wheel hub

GSR seats

JDM ITR door panels

JDM ITR carpet

JDM ITR rear cargo cover

JDM ITR rear plastics

GSR centre consol w/arm rest



With this auction you get all of my Honda parts and products that I have obtained over the years. Here is a small list-



Buddy Club racing seat- black and grey

ITR oil pumps

B16 block and head with enough spare parts to put it back together

LS motor- has no crank or tranny

Spare water pumps

Rocker arms

Valves

Camshafts

Valve springs

Retainers

Valve covers

VTEC solenoids

B16 plenum

Hatch garnish for Integra

spare Cargo cover for Integra

Alternator OBD I

Distributor OBD I

Wiring harness OBD I engine

Under dash harness OBD II- Integra

You get all kinds of spare parts and a couple of motors. My decision can be your gain! The motors alone are worth at least $1000, combined with the spare parts that you could keep or sell on Ebay- you’ve got one heck of a package. The suspension was bought from a show car- it had 0 miles on it! Basically brand new Zeal suspension. The front end does not have any body filler in it to my knowledge- I didn't see any when I was painting the front end.

If you want any pictures of specific items, or a more complete list of parts that are included email me.


Modified by advanracing62 at 5:03 PM 6/19/2004


Modified by advanracing62 at 10:28 PM 7/20/2004
Old Jun 16, 2004 | 07:24 AM
  #2  
bjorn156's Avatar
 
Joined: Feb 2003
Posts: 1,749
Likes: 0
From: charlotte...90210, usa
Default Re: 1998 LS with JDM ITR front end- lots of extra parts and great susupension!! (advanracing62)

how much are talking outright?
Old Jun 17, 2004 | 04:56 PM
  #3  
advanracing62's Avatar
Thread Starter
Honda-Tech Member
 
Joined: May 2001
Posts: 2,244
Likes: 0
From: Boise, ID
Default Re: 1998 LS with JDM ITR front end- lots of extra parts and great susupension!! (bjorn156)

pm with offer
Old Jun 19, 2004 | 05:03 PM
  #4  
advanracing62's Avatar
Thread Starter
Honda-Tech Member
 
Joined: May 2001
Posts: 2,244
Likes: 0
From: Boise, ID
Default Re: 1998 LS with JDM ITR front end- lots of extra parts and great susupension!! (advanracing62)










Old Jun 20, 2004 | 05:05 PM
  #5  
dc4drewH's Avatar
Member
 
Joined: Apr 2003
Posts: 1,834
Likes: 1
From: round hyaa
Default

is it dailydrivable?
Old Jun 21, 2004 | 07:19 PM
  #6  
advanracing62's Avatar
Thread Starter
Honda-Tech Member
 
Joined: May 2001
Posts: 2,244
Likes: 0
From: Boise, ID
Default Re: (dc4drewH)

yep- if you want to drive her
Old Jun 22, 2004 | 04:21 PM
  #7  
advanracing62's Avatar
Thread Starter
Honda-Tech Member
 
Joined: May 2001
Posts: 2,244
Likes: 0
From: Boise, ID
Default Re: 1998 LS with JDM ITR front end- lots of extra parts and great susupension!! (advanracing62)

ttt
Old Jul 20, 2004 | 08:27 PM
  #8  
advanracing62's Avatar
Thread Starter
Honda-Tech Member
 
Joined: May 2001
Posts: 2,244
Likes: 0
From: Boise, ID
Default Re: 1998 LS with JDM ITR front end- lots of extra parts and great susupension!! (advanracing62)

jdm goodness
Old Jul 20, 2004 | 08:40 PM
  #9  
theSYNDICATE's Avatar
Honda-Tech Member
 
Joined: Jul 2003
Posts: 6,662
Likes: 0
From: Derek Jeter drinks wine coolers,, The Nation, USA
Default Re: 1998 LS with JDM ITR front end- lots of extra parts and great susupension!! (advanracing62)

A JDM front with steelies?
How ghetto fabolous
Old Jul 21, 2004 | 06:55 PM
  #10  
advanracing62's Avatar
Thread Starter
Honda-Tech Member
 
Joined: May 2001
Posts: 2,244
Likes: 0
From: Boise, ID
Default Re: 1998 LS with JDM ITR front end- lots of extra parts and great susupension!! (91 Teg)

those who don't know- make comments? hahaha.. nice try kiddo
Old Jul 22, 2004 | 07:27 PM
  #11  
teg2die4's Avatar
Junior Member
 
Joined: Feb 2003
Posts: 149
Likes: 0
From: Caldwell, Id, USA
Default Re: 1998 LS with JDM ITR front end- lots of extra parts and great susupension!! (advanracing62)

bump.....

O and those were his Autox wheels and tires... hahaha... His other wheels are sick.....

So keep your smartarse comments to your self pls..........
Old Jul 23, 2004 | 10:13 PM
  #12  
advanracing62's Avatar
Thread Starter
Honda-Tech Member
 
Joined: May 2001
Posts: 2,244
Likes: 0
From: Boise, ID
Default Re: 1998 LS with JDM ITR front end- lots of extra parts and great susupension!! (advanracing62)

take it all off my hands for 8k...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
cbryant514
Southeast (Sales)
16
Jan 29, 2012 06:59 PM
topdog
Acura Integra Type-R
3
Apr 6, 2005 08:21 PM
crxcess
Acura Integra Type-R
30
Dec 8, 2003 02:34 PM
crxcess
Acura Integra Type-R
2
Oct 6, 2003 10:52 PM
Black R
Acura Integra Type-R
3
Oct 22, 2001 12:19 PM




All times are GMT -8. The time now is 11:27 AM.