I have been searching like a ****, I know which pin on the hid plug is ground, but my question is...Do I route all the grounds to this one pin? there is the high beam, low beam, and fog light ground from stock, but just one ground slot on the plug.

 

yep,..you have to ground them all to that Pin!

Don' foget to replace your Fuse as well or they won't stay on long!

 

which fuse?

 

Hello DragII,
have you got your HID working? if so mail me the diagrams or tips on the wires @ tonygq59@hotmail.com!!!!

 

emailed, yes mine are working great

btw it's the 2 low beam fuses you want to change to 15a

 

fuses? i dint replace any fuses.. besides the city/parking lights one...

 

I was told the hid's were blowing fuses for a lot of people so I switched the 10a for 15a fuses on low beams, everything is running great.

 

For any further questions about your HID set-up, please post them here: https://honda-tech.com/zeroforum?id=2

Thank you.

 

i dont have the hid's i have the non h.i.d front hehe my passanger light went out so i regrounded my ground hehe but when i was doing so the ground fell on my fluidyne radiator and the radiator acted as a cround i just found that hella funny hehe