Ok i'll make this simple. I have a 90 integra droping in a h22 with the place racing h22 kit made for 90-93 tegs. The rear and driver side mount are about an inch off. Other words to long. The motor is a 91 h22a but really is a 92 h22a. Motor was stamped 91 7. Any help or ideas would be great really need to get this done.

 

got pic?

 

Havent took pix of the problem but will tonight.

 

Has anybody used this kit?

 

i don't know many people, actually anybody who has used that mount kit. how long has it been out for? congrats tho on tackling that project on your da

 

im not familiar with the h22's but do you happen to know if there are variations in the mounts and/or brackets between the different year h22's? just a thought.

 

Thats what i thought it would be but they are all the ame. So mybe placing gave me the wrong ones. I'm going to call to today and recheck the part #'s to make sure.

 

Ok the tranny mount is hitting the fram. If i move it over so it dont hit the fram it'll push the driver side mount over more than what this pix shows.


Heres the h22 bracket. Is it a h22 bracket or an accord. The dealer faxed me a pix of a 95 bracket and it looks different.also i called and it is the right kit...