hey

i have a 92 cx with JDM ITR Recaros and im using the ITR rails brackets and sliders...to me these seats sit to high cuz im 6'3 and if i dont sit back in the seat my head will almost hit the roof...

anyone got any suggestions on other OEM or aftermarket brackets that will make the seat sit lower? help please!

 

Bump cause i like to know. I have about 2 inches of headroom in my car. i hate to see what its gonna be with my bride seat when it comes in

 

Vision brackets will lower the seat, maybe Del Sol brackets too. I too am 6'3" and noticed the teg rails sit high.

 

I dont know if the brackets are interchangable, but
del sol seats are the lowist I have sat in. Never sat
in recaros though, so take it for what its worth.


ahhh nevermind, beat me to it........

 

Wedge Engeneering makes brackets that sit 1 1/2-2 inches lower than the stock ITR brackets.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 99blackcivicSi &raquo;</TD></TR><TR><TD CLASS="quote">Wedge Engeneering makes brackets that sit 1 1/2-2 inches lower than the stock ITR brackets.</TD></TR></TABLE>
You wouldn't happen to have a link to their site? I would like to get some of this, as now I can't see the tops of my tach or speedo .

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 92b16vx &raquo;</TD></TR><TR><TD CLASS="quote">
You wouldn't happen to have a link to their site? I would like to get some of this, as now I can't see the tops of my tach or speedo .</TD></TR></TABLE>

damn you must be tall as ****.

I searched and found a site that sold them once i swear i searched for hours and found it for a friend but that was about a year ago, i tried to find it last night but couldn't i'll keep looking though

 

If you have the ITR Recaros, then you should use the recaro seat rails. I believe you can use your stock civic rail as well.

 

Bride seat rails are low position rails. So low that anything lower, you might as well weld the seat to the floor.

 

Custom Rails would probably be just as expensive. Or you can always DIY

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 99blackcivicSi &raquo;</TD></TR><TR><TD CLASS="quote">damn you must be tall as ****.

I searched and found a site that sold them once i swear i searched for hours and found it for a friend but that was about a year ago, i tried to find it last night but couldn't i'll keep looking though </TD></TR></TABLE>

http://www.wedgeengineering.net/

took a few, but finally found the number, and called, here's their address, they are pretty cool people.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboEG6 &raquo;</TD></TR><TR><TD CLASS="quote">If you have the ITR Recaros, then you should use the recaro seat rails. I believe you can use your stock civic rail as well.</TD></TR></TABLE>
we are aware of how to mount them, but some of us are too tall, and don't like to get our "lean on" when driving, so the Integra ITR rails are too tall.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">Custom Rails would probably be just as expensive. Or you can always DIY
</TD></TR></TABLE>
Actually, the Wedge Engineering rails are only $60ish

 

http://www.hybridautomotive.co....html

these are more expensive, but do the same thing.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by white95eg &raquo;</TD></TR><TR><TD CLASS="quote">http://www.hybridautomotive.co....html

these are more expensive, but do the same thing.</TD></TR></TABLE>

Damn, $290 compared to $60, not much of a choice there.

 

you should just trade me your itr's for my del sols. they sit really low. function over fashion.

 

i have jdm itr's in my eg and im 6'8''...i have plenty of room between my head and the roof and my seats arent all pimped back at all..im used to non reclinable race buckets so thats how i like my seats...im using jdm itr brackets