Gonna be swapping a b18b in my hatch and was just wondering what some poeple on here are running 1/4 and 1/8 mile. Please post times and what mods you have.

Thanks so much.

 

my best was 15.2 "back in the day"

92cx w/ AC...its hott in texas
intake and exhaust
slips and gutted

bald tires

 

15.8 and my **** misfires...no one in this fuggin forum can help me. Replaced cap, rotor, spark plugs, spark plug wires, internal coil (b16), fuel pressure at 36 psi with vac line off.

Good luck.

 

i was runing 15.480 on a broke mount then i fixed that and ran 15.25 but that was with open headers because my flex pipe snapped. So i haven't gotten a chance to run it in a normal condition. so i would say about a 15.3 something with the full mufflersystem

 

I know a person w/ a DX coupe with just exhaust and ran a 14.8

 

the dx coupe is super light

 

I ran a 15.0@90mph last week.
Full interior and stereo system still in it.
Could easily get in to the 14's if I gutted it.
Stock B18b with Iceman intake, dc sports 4-2-1 header, and Invidia cat back exhaust.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by silverEH2 &raquo;</TD></TR><TR><TD CLASS="quote">the dx coupe is super light </TD></TR></TABLE>

what the hell are you talking about
dx= heavier then cx hatch
and they run about low to mid 15s

peace

 

Heres my times from last week:

2nd Run, 20 psi in tires and launched @2500

R/T... .527
60"... 2.375
330... 6.375
1/8... 9.988
MPH... 71.72
1000.. 12.918
1/4... 15.403
MPH... 90.75

3rd run, 15psi in tires and launched @3000

R/T... .692
60"... 2.177
330... 6.249
1/8... 9.650
MPH... 72.46
1000.. 12.558
1/4... 15.043
MPH... 90.73

These times are with 15" LS mesh wheels and Kumos 205/50/15 tires

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slowhatch4now &raquo;</TD></TR><TR><TD CLASS="quote">

what the hell are you talking about
dx= heavier then cx hatch
and they run about low to mid 15s

peace
</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Ki3t &raquo;</TD></TR><TR><TD CLASS="quote">I know a person w/ a DX coupe with just exhaust and ran a 14.8 </TD></TR></TABLE>

you fucktard i was replying to him

 

14.6 in a cx with a intake, fpr, 2.5 inch exhaust and a short shifter, hx wheels,port polish head

 

my boy with a coupe ran a 14.4

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DC2EGHB &raquo;</TD></TR><TR><TD CLASS="quote">Heres my times from last week:

2nd Run, 20 psi in tires and launched @2500

R/T... .527
60"... 2.375
330... 6.375
1/8... 9.988
MPH... 71.72
1000.. 12.918
1/4... 15.403
MPH... 90.75

3rd run, 15psi in tires and launched @3000

R/T... .692
60"... 2.177
330... 6.249
1/8... 9.650
MPH... 72.46
1000.. 12.558
1/4... 15.043
MPH... 90.73

These times are with 15" LS mesh wheels and Kumos 205/50/15 tires


</TD></TR></TABLE>

damn your 60 inch times are slow

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SOHC_MShue &raquo;</TD></TR><TR><TD CLASS="quote">damn your 60 inch times are slow </TD></TR></TABLE>

inch eh?

 

60 inch...lol.

 

Hi guys,

I ran a bets 14.59 @92.6 mph with a b18b/SIR tranny, open headers, with a 2.15 60' time.

Car is a 92 cx Hatch and was stripped.

 

Hell ya I am getting just the basics for now intake, 4-2-1 header, exhaust and clutch, lightweight flywheel, kinda gutted, I will be running on the vx 13" rims for awhile. I am so sick of my ******* little dx motor pos, can't wait to see what times I can pull. I live in utah and it sucks for elevation so that is gonna slow me down.

Well keep posting those times!

 

Back in the day, my '92 cx went 14.8 (after 3 times to get it right). Nothing much done, I/H/E and a 6 puck, gutted on steelies...

 

last week i ran 15.6 on my stock B18B w/GSR tranny and an intake. Hopefully can run better this week, looking to get like 15.4-15.2

 

cx stock, 15.8 shity tires and open header with a cai. High alt owns.