Is 50 psi at WOT to much on a B16 with ITR cams?
Thread Starter
New User
Joined: Sep 2001
Posts: 177
Likes: 0
From: San Antonio, TX, united states
Is 50 psi at WOT to much on a B16 with ITR cams?
I was afraid that I would be buring lean so I increased the pressure to 40 at idle and 50 psi at WOT. Is that to much? Opinions would be gratly appreciated.
Honda-Tech Member
Joined: Jun 2000
Posts: 453
Likes: 0
From: Milwaukee, WI, USA
Re: Is 50 psi at WOT to much on a B16 with ITR cams? (b16awarrior)
its safe but your car will be slow as hell since
its running so much feul. ive got 12:5:1 compression pistons in
a gs-r and running toda b's my pressure is at 30 psi and 40 at wot
i think 40 is a little too muh.
if your wondering why your car is slow this might be a reason
its running so much feul. ive got 12:5:1 compression pistons in
a gs-r and running toda b's my pressure is at 30 psi and 40 at wot
i think 40 is a little too muh.
if your wondering why your car is slow this might be a reason
Banned
Joined: Oct 2001
Posts: 813
Likes: 0
From: BluePrintRacing.com, CA, USA
Re: Is 50 psi at WOT to much on a B16 with ITR cams? (b16awarrior)
Best thing to do is take the car and get it dynoed for best results.I also recommed more upgrades to help the itr cams such as bored t/b, better valve springs and retainers, port & polished head etc.
Thread
Thread Starter
Forum
Replies
Last Post
InfamousRS
Hybrid / Engine Swaps
19
Jun 16, 2002 09:18 PM
