280 psi is ok for H22A4 with oversize Type S pistons?

Reply Subscribe

Thread Tools

Search this Thread

Apr 16, 2004 | 03:21 AM

LaloVTEC

Thread Starter

Joined: Mar 2004

Posts: 12

Likes: 0

From: Panama, Panama

280 psi is ok for H22A4 with oversize Type S pistons?

It is ok reading 280 psi for a rebuild H22A4 with oversize Type S pistons?

The engine have no modifications to the block, the head has not been milled, stock head gasket, stock valves.

Any help is appreciated.

Apr 16, 2004 | 03:40 AM

93H22ACX

Joined: Apr 2002

Posts: 2,884

Likes: 0

From: Dynotuner.net, 2JZGTE

Re: 280 psi is ok for H22A4 with oversize Type S pistons? (LaloVTEC)

that sounds like a very healthy engine if its 280psi on all four cylinder

Apr 16, 2004 | 10:35 AM

LaloVTEC

Thread Starter

Joined: Mar 2004

Posts: 12

Likes: 0

From: Panama, Panama

Re: 280 psi is ok for H22A4 with oversize Type S pistons? (95PRELUDEVTEC206)

So it is normal to get this reading for Type S pistons?

i was worried about it, because my car is a daily driver.

So i even get away with a nitrous shot for the drag strip.......