full throttle shift
how many of you guys do a full throttle shift (not letting off the gas at all)? I have two questions about it.
1. What stops the tranny from grinding?
2. How much times does it take off?
I heard this is really good, because it keeps the turbo spooled. Also i heard its better to do it with a MSD 2 step. I have hondata where the fuel is set to cut off at 7200, but i was told this is not as good as the msd.
1. What stops the tranny from grinding?
2. How much times does it take off?
I heard this is really good, because it keeps the turbo spooled. Also i heard its better to do it with a MSD 2 step. I have hondata where the fuel is set to cut off at 7200, but i was told this is not as good as the msd.
DYNO-PRO
Joined: Mar 2004
Posts: 4,392
Likes: 0
From: SoCal I.E 909, CA, where we innovate not immitate
that is called "power shifting and yes i do it, if you are quick enough there will be no grind and it can take off up to a tenth
of a sec per shift
of a sec per shift
power shifting is the way to go...you've just got to practise a lot to get good at it...for some reason when you power shift it lowers your et and mph...regular shifting gives slower et but more mph...this is just what i've experienced...
Power shifting definately works.. only problem is i blew a few trannys learning how to do it properly.. my current tranny has lasted me over a year so i think i got it down pretty good...
I always shift full throttle. It just takes a lot of practice. it helps if you practice by just shifting fast. If you screw up you can over rev your engine or trash your tranny so be careful!!!
Trending Topics
when i was learning i would practise at a lower rpm...so that i had room for error.
also instead of just pushing the clutch in...kick it hard because you're going to be shifting very fast...it's not pretty when the clutch doesn't engage in time...i've got an msd 2step so if i ever miss, then i've got that rev limiter to protect the engine.
good luck man
also instead of just pushing the clutch in...kick it hard because you're going to be shifting very fast...it's not pretty when the clutch doesn't engage in time...i've got an msd 2step so if i ever miss, then i've got that rev limiter to protect the engine.
good luck man
DYNO-PRO
Joined: Mar 2004
Posts: 4,392
Likes: 0
From: SoCal I.E 909, CA, where we innovate not immitate
yes a i agree practice on the street just normal driving but when you shift leave the gas pedal down, kick the clutch pedal and at the same time SLAM the next gear you will get it, however you need to have a good clutch in the car or you will fry it
my times suck
and it becasue i dont power shift.
however this is my only trans i have ever had after 3 seasons(nitrous,turbo,turbo) of hard core banging gear shifting regular but fast.
i expect to blow it to the moon this year tho.
and it becasue i dont power shift.
however this is my only trans i have ever had after 3 seasons(nitrous,turbo,turbo) of hard core banging gear shifting regular but fast.
i expect to blow it to the moon this year tho.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by flatty311 »</TD></TR><TR><TD CLASS="quote">you said you hondata cut fuel at 7500 )it's better to us msd msd cuts spark not fuel so you won't have to worry about lienin out msd is a great tool for the dragster</TD></TR></TABLE>
Its only for a split second so it shouldn't cause any problems at all. Its the same exact thing that the rev limiter uses. Obviously if it was so horrible, Honda wouldn't have used a fuel cut. Don't sit there and ride on it for 10 minutes and you should be ok.
Its only for a split second so it shouldn't cause any problems at all. Its the same exact thing that the rev limiter uses. Obviously if it was so horrible, Honda wouldn't have used a fuel cut. Don't sit there and ride on it for 10 minutes and you should be ok.
Do you have the older Hondata, s100 or s200?
http://hondata.com/media/fullthrottleshift.mov
http://hondata.com/media/fullthrottlefeet.mov
http://hondata.com/media/fullthrottleshift.mov
http://hondata.com/media/fullthrottlefeet.mov
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Arturbo »</TD></TR><TR><TD CLASS="quote">somebody posted a sound clip of Mike Laskey but I dont know who it was. Who has that clip? You can hear the full-throttle shifts he does.
art</TD></TR></TABLE>
Here is the sound clip if you scroll mid page
https://honda-tech.com/zerothread?id=813863
art</TD></TR></TABLE>
Here is the sound clip if you scroll mid page

https://honda-tech.com/zerothread?id=813863
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Arturbo »</TD></TR><TR><TD CLASS="quote">somebody posted a sound clip of Mike Laskey but I dont know who it was. Who has that clip? You can hear the full-throttle shifts he does.
art</TD></TR></TABLE>
here's a clip off hondata.com
http://www.hondata.com/media/fullthrottlefeet.mov
art</TD></TR></TABLE>
here's a clip off hondata.com
http://www.hondata.com/media/fullthrottlefeet.mov
Thread
Thread Starter
Forum
Replies
Last Post









