i am having a prob with my skunk2 intake mani that i installed yesterday
i am pretty sure that i have everthing in the right spot
when i started the car it idled alright a little high but it hasnt been ran in a while
but when it drops down to a lower idle and you rev it up a bit it goes up and then stays a lot high then it should be at around 2 grand
i do not know what the prob is i m gonna pick up the diagnostics thing from my friend and hook it up
if any of you guys have had this same prob let me know and if and how you fixed it

 

Try to post pictures and I'll help you.

 

how do i do that
i have a digital camera but i dont know how i can put them on here

 

first upload the pics to a site like imagestation. and then u link it there from here

 

do you still have the stock GSR Throttle cable? if so it might be sticking since a lot of the time it hits the hood

 

Make sure your throttle cable isn't too tight, and check for vacuum leaks

 

nah i got the itr throttle cable and bracket i dont think its too tight but i'll check it

 

well i got it everything is good now car is running perfect
i just hadda tighten some vaccuum lines b/c i noticed that they were leakin and then my throttle cable was too tight it was gettin caught up when i let go of the throttle
its all good now thanks

 

vacum leak check seals and if bolts are tight

 

is it a gsr skunk2 intake manifold? if so it wont work well with your p73 ecu. might want to look into it before you hurt something.