guys i just got the jdm conversion done with a cwest front bumper and cf hood but my oem hid the beams are not aline right like one is two high and the left one is to far to the left how do i adjust the hid oem units thanks

 

Look on the back of the headlight, there will be marks that say U and D with arrows indicating which way to turn the vertical adjustment screw. There is also a screw for horizontal adjustment.

 

go here. http://www.team-integra.net/se...light

just remember, counterclockwise=raises beam or inward

 

thanks

 

i can see the u and d arrow but i dont konw which screw to turn and what kind of scerw dirver do i use

 

help me

 

If there is room at the back, you can use a ratchet and a 8mm (and extension if appropriate). If not, try turning the screws with a philips.

 

thanks wish someon had pics like i can see the u and d but i dunno which screw to turn

 

One thing to remember is that since the JDM people drive on the "other" side of the road, ... the lights are "naturally" aimed differently than you might like for USDM use.

 

Look at your owners manual, it is similar.

 

okt hanks yeah cuz right now my left headlight is off to the left to much and my right is to high