Hi, I couldnt post on the appearance section so i am asking here: I just receivec a set of illuminesent "race" gauges from R otto racing "ebay special" and it did not come with instructiond, does any one know how to install the ese gauges if it came with a digital inverter also know as an 8 stage gen2 transformer because theses gauges light up 8 different colors and just overlay on top of my existing oem gauges. on the site it says that power is given through a "headlight powersource"

Any help would be greatly appreciated

 

hummmmm as im not sure what kinda gauges those are, but here is what i know about color gages in general.

dont take the pin off cuz that will screw up your ****....you have to slide it over you oem gauges. best way to do this is take off the black covers, i'd leave them off...it looks cleaner.

As for wiring? uh .....i used to wire splicer taht you can get like a shucks or something and spliced the wires in the back of the gauge cluster to connect to the power box.

I hope this kinda helps????

 

Old school indiglo gauges. Good ****

 

In my opinion leave the stock gauges, if anything go JDM. Thats what I did.


Modified by StErN at 7:02 PM 3/11/2004

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by StErN &raquo;</TD></TR><TR><TD CLASS="quote">Leave the stock gauges, if anything go JDM. Thats what I did. </TD></TR></TABLE>

LoL....go jdm, ok vin diesel junior

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by StErN &raquo;</TD></TR><TR><TD CLASS="quote">Leave the stock gauges, if anything go JDM. Thats what I did. </TD></TR></TABLE>
yea theres a plan! pay 3X as much for used OEM parts from a junkyard.

not everyone likes JDM, let him do whatever he wants.

 

It was only 5 buks or so. Ya heard of stain glass paint?