Type S Pistons on old rods

Reply Subscribe

Thread Tools

Search this Thread

Mar 6, 2004 | 09:22 AM

Aaron.Hillman

Thread Starter

Honda-Tech Member

Joined: Feb 2004

Posts: 243

Likes: 0

From: USA

Type S Pistons on 93-95 rods

What you need to do to install type s pistons on 93-95 H22A rods.? Are piston pins the same diameter ?

Modified by aahill69 at 6:54 PM 3/6/2004

Mar 6, 2004 | 10:53 AM

0Mike95lude

Joined: Jul 2000

Posts: 2,392

Likes: 0

From: Snohomish county, WA, USA

Re: Type S Pistons on 93-95 rods (aahill69)

You need to have the rods rebushed to accept floating wrist pins.

Mar 6, 2004 | 10:55 AM

Aaron.Hillman

Thread Starter

Honda-Tech Member

Joined: Feb 2004

Posts: 243

Likes: 0

From: USA

Re: Type S Pistons on 93-95 rods (Mike95lude)

you mean bore the small end off the rod?

Mar 6, 2004 | 01:31 PM

ludeconduct8

Joined: Feb 2004

Posts: 42

Likes: 0

From: CA, USA

does anybody know if there is any special things that need to be done to use the type-s pistons on USDM 98 stock rods?

Mar 6, 2004 | 01:52 PM

satan_srv

Member

Joined: Mar 2002

Posts: 8,113

Likes: 3

From: East Village, NYC

Re: (ludeconduct8)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ludeconduct8 »</TD></TR><TR><TD CLASS="quote">does anybody know if there is any special things that need to be done to use the type-s pistons on USDM 98 stock rods?</TD></TR></TABLE>

nothing.

Mar 6, 2004 | 01:53 PM

satan_srv

Member

Joined: Mar 2002

Posts: 8,113

Likes: 3

From: East Village, NYC

Re: Type S Pistons on 93-95 rods (aahill69)

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by aahill69 »</TD></TR><TR><TD CLASS="quote">you mean bore the small end off the rod?</TD></TR></TABLE>

no you change the bushing.