Yes I am aware that the tensioner conversion has been covered many times but Im going to be starting my car with the auto tensioner installed. I have milled the head .025". Will there be an issue with the auto tensioner with this much mill? I know it isn't much but heard that there may be problems with the auto tensioner and milled heads. Thanks

 

 

anyone?

 

I dont think you should have any problems. Guess you wont really know till you try.

 

anyone else?

 

ask ranta18 or satansrv they'll know if anyone does

 

i have my head milled as well,what i did was i took the tensioner apart and gave the spring a couple extra turns.by doing this my timing belt has no more play in it
anymore.

 

My head was milled .020" and the tensioner went out after about 3 months. At the same time I put in Crower Stage 2 cams. I had to take the head off and have all the valves checked. I highly recommend a manual setup like what is on the H23.