I did a lot to my 91 HB and I'll answer questions... (mods please don't move)
I started an opinion poll on my car and that didn't go so well, especially after they moved it to the appearance forum. So now I'm just postin pics of my car and listing the mods I can think of- I'll have to add the rest to this post as I remember. The reason they're not all on the top of my head is because I've been dealin with my winter car for a while (89 Subaru XT6). If you have any questions, feel free to ask. I started with a STD base model so thats why some Si parts are listed.
Just so I don't get the same comments from everyone: I do wanna lower the car but I have to wait till I can afford a better suspension and metal fenders to put on so I can roll em out. The Z3 fenders are fiberglass so they'll shatter, and my original ones are too damaged. So anyway here's the pics and a list...

EXTERIOR:
Ferrari Red (Rosso Corsa) paint
-high quality PPG primer and paint
Shaved Side Moldings and Emblems
-mostly used fiberglass filler
Fiberglass Z3 Fenders
US headlights with JDM Stanley clear corners
Clear taillights painted with Krylon stained glass paint
Canadian center taillight piece with raised letters and "Special Edition"
JDM SiR spoiler with LEDs
Si stock painted bumpers
Customized front Grill w/ Dual Foglights (blue/white)
17" Enkei Zokus with 205/40 Toyo Proxes FZ4
INTERIOR:
90-91 Civic Sedan Steering Wheel, tilt steering and INT wiper setting
94-01 Integra Center Console
Si Clock and Gauges w/ Tach, trunk light, cig lighter (STD has nothin)
-I made the gauges light up white by putting blue tint on the fiberglass piece that covers the yellow bulbs
Si Cloth Seats- front and back (I had the shitty STD vinyl)
Original Civic Floormats
Short Shifter and carbon fiber shift ****
Two 12" Infinity Kappa Perfect 1400w Subs w/ Amp
PERFORMANCE:
Switched to MPFI (Multi-Port Fuel Injection) from an Si
Cold Air Intake
100% Stainless Steel 2.5" Thermal Exhaust
Modified by OldSchoolHatch at 7:29 PM 2/25/2004
Just so I don't get the same comments from everyone: I do wanna lower the car but I have to wait till I can afford a better suspension and metal fenders to put on so I can roll em out. The Z3 fenders are fiberglass so they'll shatter, and my original ones are too damaged. So anyway here's the pics and a list...

EXTERIOR:
Ferrari Red (Rosso Corsa) paint
-high quality PPG primer and paint
Shaved Side Moldings and Emblems
-mostly used fiberglass filler
Fiberglass Z3 Fenders
US headlights with JDM Stanley clear corners
Clear taillights painted with Krylon stained glass paint
Canadian center taillight piece with raised letters and "Special Edition"
JDM SiR spoiler with LEDs
Si stock painted bumpers
Customized front Grill w/ Dual Foglights (blue/white)
17" Enkei Zokus with 205/40 Toyo Proxes FZ4
INTERIOR:
90-91 Civic Sedan Steering Wheel, tilt steering and INT wiper setting
94-01 Integra Center Console
Si Clock and Gauges w/ Tach, trunk light, cig lighter (STD has nothin)
-I made the gauges light up white by putting blue tint on the fiberglass piece that covers the yellow bulbs
Si Cloth Seats- front and back (I had the shitty STD vinyl)
Original Civic Floormats
Short Shifter and carbon fiber shift ****
Two 12" Infinity Kappa Perfect 1400w Subs w/ Amp
PERFORMANCE:
Switched to MPFI (Multi-Port Fuel Injection) from an Si
Cold Air Intake
100% Stainless Steel 2.5" Thermal Exhaust
Modified by OldSchoolHatch at 7:29 PM 2/25/2004
My advice don't post up your stereo stuff. Yeah it's shiny paint, yeah it'll prolly get moved, but the tails kinda are odd being turn white and all
Trending Topics
Nice looking ride,
My engine looks about as clean. lol
Can you tell me what year and model you got your centre console out of?
I've got a 91' Si HB as well and I NEED a center console like nothing else. Also, where did you get that steering wheel.
My engine looks about as clean. lol
Can you tell me what year and model you got your centre console out of?
I've got a 91' Si HB as well and I NEED a center console like nothing else. Also, where did you get that steering wheel.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hondaaaaah »</TD></TR><TR><TD CLASS="quote">Nice looking ride,
My engine looks about as clean. lol
Can you tell me what year and model you got your centre console out of?
I've got a 91' Si HB as well and I NEED a center console like nothing else. Also, where did you get that steering wheel. </TD></TR></TABLE>
oooops, once again, I didn't read the mods list and did't see them.
Never mind.
My engine looks about as clean. lol
Can you tell me what year and model you got your centre console out of?
I've got a 91' Si HB as well and I NEED a center console like nothing else. Also, where did you get that steering wheel. </TD></TR></TABLE>
oooops, once again, I didn't read the mods list and did't see them.
Never mind.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by crxirex »</TD></TR><TR><TD CLASS="quote">whats the point of this post? Why don't you just post your pic's in the image post up top? Someone should post some drunk chicks to make this topic more interesting
</TD></TR></TABLE>
naked chicks please..anyways paint looks shiny..I like the mpfi swap...needs to be lowered...you can still keep the z3 if you lower it just shave the lip of it off and put resing to keep it from fraying. I seriously hope thats not all filler and fiberglass where it was shaved. It will fall off if the door gets shut hard on a cold winter day. The proper way is to weld in a metal strip and use filler over that to make it smooth. Your way looks good too but how long will it last? nice car though I like the 88-89 hatch bumpers better than 90-91 and the tails look odd
</TD></TR></TABLE>naked chicks please..anyways paint looks shiny..I like the mpfi swap...needs to be lowered...you can still keep the z3 if you lower it just shave the lip of it off and put resing to keep it from fraying. I seriously hope thats not all filler and fiberglass where it was shaved. It will fall off if the door gets shut hard on a cold winter day. The proper way is to weld in a metal strip and use filler over that to make it smooth. Your way looks good too but how long will it last? nice car though I like the 88-89 hatch bumpers better than 90-91 and the tails look odd
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by OldSchoolHatch »</TD></TR><TR><TD CLASS="quote">
PERFORMANCE:
Switched to MPFI (Multi-Port Fuel Injection) from an Si
Cold Air Intake
100% Stainless Steel 2.5" Thermal Exhaust
Modified by OldSchoolHatch at 7:29 PM 2/25/2004</TD></TR></TABLE>
to me this is the only part that matters, and well...it kinda speaks for itself
PERFORMANCE:
Switched to MPFI (Multi-Port Fuel Injection) from an Si
Cold Air Intake
100% Stainless Steel 2.5" Thermal Exhaust
Modified by OldSchoolHatch at 7:29 PM 2/25/2004</TD></TR></TABLE>
to me this is the only part that matters, and well...it kinda speaks for itself
Would you rather they be naked men? UMM!!!!! This post is dull. Drunk women are so much better looking than that car lol. An not to mention they have more mod's and curve's then that ride
Hey!Easy now...give the guy some props,thats a nice looking ride!I don't agree with the wheel choice,some bronze Circuit 8's with some drop springs and that thing would look badass!I really like what he's done to the interior,it makes a huge difference over the plain STD interior.I was thinking of going with the 4 spoke OEM steering wheel myself,and he should get a trophy just for being able to find some nice Si seats.Anyway,some of the mods are just too quick to jump your *** over some stupid ****...talk about misuse of authority.They may deduct a couple points from your rating or take away your avatar,but you'll live.So don't be afraid to post and speak whats on your mind.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by no2psi »</TD></TR><TR><TD CLASS="quote">those wheels are too fuggin big.</TD></TR></TABLE>
and not to mention they look like ***....its clean ill give u that but its pretty damn stock to me....if i had a cookie id give u one for tryin
and not to mention they look like ***....its clean ill give u that but its pretty damn stock to me....if i had a cookie id give u one for tryin
what questions would people have?
stock looking engine....
not like you stuck a v8 in there or a twin turbo....
paint job, rims and a cai....
whats to ask?
stock looking engine....
not like you stuck a v8 in there or a twin turbo....
paint job, rims and a cai....
whats to ask?
Thread
Thread Starter
Forum
Replies
Last Post
lif3tak3n
Honda CRX / EF Civic (1988 - 1991)
26
Feb 9, 2010 07:13 PM



