how do you remove those tubes?

and



is there suposed to be that big of a gap there?

 

the airbox(first picture) just drops right out with the removal of like 2 screws, you can either take it out from the side of the car(through the fender well) or if you can take the bumper off, it isn't that hard to take off.

 

**** how gay

what about the gap?

 

haha those things are ugly yah like the guy said on the previouse post! do what he said

 

eh... just use a sawzall if you get mad

 

Remove the bolts that hold it to the chassis and twist and jiggle it out, just takes a little maneuvering. As for the gap, if it doesnt leak leave it alone.

 

those tubes take approx ten mins to get out just gotta get under the car and the gap should be fine as long as its not leakin like he said ^^^^^^^^

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mk3supraholic &raquo;</TD></TR><TR><TD CLASS="quote">**** how gay

what about the gap?</TD></TR></TABLE>

oh yes!

 

hahahahahahahaha hilarious

 

Lake elsinore. I'm close to you; I'll be your friend

 

serously stop. every one had to start some were. and back befor you had your ase certified **** and you engineering degree you knew jack about cars.

**** he is asking legitiment quesiton.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ^jefs0ng &raquo;</TD></TR><TR><TD CLASS="quote">Lake elsinore. I'm close to you; I'll be your friend </TD></TR></TABLE>

 

cool stuff is cool

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by slammed_93_hatch &raquo;</TD></TR><TR><TD CLASS="quote">serously stop. every one had to start some were. and back befor you had your ase certified **** and you engineering degree you knew jack about cars.

**** he is asking legitiment quesiton.</TD></TR></TABLE>

same point i was going make.. at least he is trying to learn, i wish i made ht when i was learning this ****.... hahaha

 

Ha HA I remember taking that out of my friends hatch! after all of the bolts where gone, I was pulling on the bottom out under the fender real hard then Foom! that air box flew halfway across the yard! It was funny ****, I felt like the incredible hulk

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by OOsi &raquo;</TD></TR><TR><TD CLASS="quote">are you ******* serious? you dont know dick about cars kid... my advice, let someone who knows what they a re doing work on your car for you instead. at first i wanted to just make fun of you, now i just feel bad for you.


ignorance is not stupidity, just the lack of knowlege.</TD></TR></TABLE>

dont be a dick, .

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by OOsi &raquo;</TD></TR><TR><TD CLASS="quote">are you ******* serious? you dont know dick about cars kid... my advice, let someone who knows what they a re doing work on your car for you instead. at first i wanted to just make fun of you, now i just feel bad for you.


ignorance is not stupidity, just the lack of knowlege.</TD></TR></TABLE>

seriously please someone take off 00si's percentage points. He is such a tool

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by OOsi &raquo;</TD></TR><TR><TD CLASS="quote">are you ******* serious? you dont know dick about cars kid... my advice, let someone who knows what they a re doing work on your car for you instead. at first i wanted to just make fun of you, now i just feel bad for you.


ignorance is not stupidity, just the lack of knowlege.</TD></TR></TABLE>

If this was said everytime someone had a question Honda Tech would be completely worthless. That did absolutly nothing in helping this site and was completely uncalled for.