Nice Gen2 JDM B16A swap, D16Z bulletproof tranny, D16Z parts, and JDM B18C Type R parts for sale.
I'm selling the following items for my brother, Dave. If you want to negotiate prices or would like pictures of any of the items (serious inquiries only), then please email him directly at davidplatt01@comcast.net.
Complete Gen2 JDM B16A (170hp stock+) Engine & Tranny, recently fully tuned & maintained, JDM DC Sports 4-1 Header, ~45K miles, EXTREMELY CLEAN...SOLD
-Comes with everything you need for a swap (no ECU or harness)
-Newly painted valve cover.
-Only 3000 miles on it since I cleaned, maintained, and tuned it (valve adjustment & timing)
-New water pump, timing belt, tensioner pulley, cap, rotor, plugs, gaskets, and fluids
-This is a "Tuesday motor". Runs very strong, and sounds excellent.
-Can install for locals for an additional $500.
D16Z Fully Built Honda Hydro Transmission, only 3 months old...bulletproof!
-Quaife Differential, Brand New Cryo Treated Gears, Brand New Cryo Treated Syncros, Cryo Treated Shift Forks, Cryo Treated Shafts, and Brand New Bearings
SOLD
93 Civic EX Parts for Sale:
-Polished Honda Valve Cover (Nice!)..................................on ebay now for $80
-Both Newly Rebuilt Axles............................................. ....$95 pair
-Yellow Moroso Spark Plug Wires........................................$15
-Honda Steering Wheel with Air Bag...................................$175
-Power Steering Pump & Rack...........................................$40
-Almost New Honda Timing Belt, Tensioner, & Water Pump...$45
-Newly rebuilt starter........................................... .............$20
-Used Alternator........................................ .......................$10
-Fairly Used Thermostat & Housing.....................................$10
-Honda Shift linkage with 3" Shortened Shifter....................$30
-Honda Front Sway Bar............................................... ......$30
-Match Bored & Polished Intake Manifold ***'y....................SOLD
-STR Fuel Rail (New)............................................. ...........SOLD
-Gude Cam............................................... ......................SOLD
-AEM Cam Gear.............................................. .................SOLD
-DC Sports 4-2-1 header............................................ ......SOLD
-DC Sports One-Piece 4-1 header......................................SOLD
-RC Engineering Bored Throttle Body.................................SOLD
-Honda Throttle Body.............................................. .........SOLD
97 Integra JDM Type R Parts for Sale (<28,000miles):
-Type R Front Suspension/Brake Conversion.......................on ebay now for $196
-Type R Fuel Injectors & Feul Rail.......................................$65
-Type R JDM Exhaust Manifold.......................................... ...SOLD
-Type R Clutch............................................ ......................$40
-Type R Cam Gears............................................. ..............$10
-Type R Motor Mount & Front Mounts (missing 2 pieces)........$25
-Type R 15.5lb Flywheel.......................................... ...........SOLD
-Type R Crank Pulley............................................ .............SOLD
-P73 ECU............................................... ..........................SOLD
-Type R OBD2 Distributor....................................... ...........SOLD
-Type R OBD2 JDM Wiring Harness.....................................SOLD
-Type R Cams.............................................. .....................SOLD
-Type R Valve Springs & Retainers......................................SOL D
94 Prelude VTEC Parts for Sale:
-Throttle Body.............................................. .....................SOLD
-Intake Manifold, Complete (tb above, no injectors)..............SOLD
Modified by dplatt at 12:20 AM 3/7/2004
Modified by dplatt at 11:04 AM 3/14/2004
Modified by dplatt at 12:26 AM 3/27/2004
Modified by dplatt at 1:38 PM 3/30/2004
Modified by dplatt at 10:29 PM 3/31/2004
Modified by dplatt at 12:15 AM 4/20/2004
Modified by dplatt at 7:46 AM 4/22/2004
Modified by dplatt at 8:17 AM 4/28/2004
Modified by dplatt at 8:18 AM 4/28/2004
Modified by dplatt at 1:22 PM 5/8/2004
Modified by dplatt at 7:43 AM 5/10/2004
Modified by dplatt at 9:05 AM 5/11/2004
Modified by dplatt at 5:12 PM 5/15/2004
Modified by dplatt at 8:07 AM 5/17/2004
Modified by dplatt at 8:09 AM 5/17/2004
Modified by dplatt at 8:11 AM 5/17/2004
Modified by dplatt at 7:43 AM 5/21/2004
Complete Gen2 JDM B16A (170hp stock+) Engine & Tranny, recently fully tuned & maintained, JDM DC Sports 4-1 Header, ~45K miles, EXTREMELY CLEAN...SOLD
-Comes with everything you need for a swap (no ECU or harness)
-Newly painted valve cover.
-Only 3000 miles on it since I cleaned, maintained, and tuned it (valve adjustment & timing)
-New water pump, timing belt, tensioner pulley, cap, rotor, plugs, gaskets, and fluids
-This is a "Tuesday motor". Runs very strong, and sounds excellent.
-Can install for locals for an additional $500.
D16Z Fully Built Honda Hydro Transmission, only 3 months old...bulletproof!
-Quaife Differential, Brand New Cryo Treated Gears, Brand New Cryo Treated Syncros, Cryo Treated Shift Forks, Cryo Treated Shafts, and Brand New Bearings
SOLD
93 Civic EX Parts for Sale:
-Polished Honda Valve Cover (Nice!)..................................on ebay now for $80
-Both Newly Rebuilt Axles............................................. ....$95 pair
-Yellow Moroso Spark Plug Wires........................................$15
-Honda Steering Wheel with Air Bag...................................$175
-Power Steering Pump & Rack...........................................$40
-Almost New Honda Timing Belt, Tensioner, & Water Pump...$45
-Newly rebuilt starter........................................... .............$20
-Used Alternator........................................ .......................$10
-Fairly Used Thermostat & Housing.....................................$10
-Honda Shift linkage with 3" Shortened Shifter....................$30
-Honda Front Sway Bar............................................... ......$30
-Match Bored & Polished Intake Manifold ***'y....................SOLD
-STR Fuel Rail (New)............................................. ...........SOLD
-Gude Cam............................................... ......................SOLD
-AEM Cam Gear.............................................. .................SOLD
-DC Sports 4-2-1 header............................................ ......SOLD
-DC Sports One-Piece 4-1 header......................................SOLD
-RC Engineering Bored Throttle Body.................................SOLD
-Honda Throttle Body.............................................. .........SOLD
97 Integra JDM Type R Parts for Sale (<28,000miles):
-Type R Front Suspension/Brake Conversion.......................on ebay now for $196
-Type R Fuel Injectors & Feul Rail.......................................$65
-Type R JDM Exhaust Manifold.......................................... ...SOLD
-Type R Clutch............................................ ......................$40
-Type R Cam Gears............................................. ..............$10
-Type R Motor Mount & Front Mounts (missing 2 pieces)........$25
-Type R 15.5lb Flywheel.......................................... ...........SOLD
-Type R Crank Pulley............................................ .............SOLD
-P73 ECU............................................... ..........................SOLD
-Type R OBD2 Distributor....................................... ...........SOLD
-Type R OBD2 JDM Wiring Harness.....................................SOLD
-Type R Cams.............................................. .....................SOLD
-Type R Valve Springs & Retainers......................................SOL D
94 Prelude VTEC Parts for Sale:
-Throttle Body.............................................. .....................SOLD
-Intake Manifold, Complete (tb above, no injectors)..............SOLD
Modified by dplatt at 12:20 AM 3/7/2004
Modified by dplatt at 11:04 AM 3/14/2004
Modified by dplatt at 12:26 AM 3/27/2004
Modified by dplatt at 1:38 PM 3/30/2004
Modified by dplatt at 10:29 PM 3/31/2004
Modified by dplatt at 12:15 AM 4/20/2004
Modified by dplatt at 7:46 AM 4/22/2004
Modified by dplatt at 8:17 AM 4/28/2004
Modified by dplatt at 8:18 AM 4/28/2004
Modified by dplatt at 1:22 PM 5/8/2004
Modified by dplatt at 7:43 AM 5/10/2004
Modified by dplatt at 9:05 AM 5/11/2004
Modified by dplatt at 5:12 PM 5/15/2004
Modified by dplatt at 8:07 AM 5/17/2004
Modified by dplatt at 8:09 AM 5/17/2004
Modified by dplatt at 8:11 AM 5/17/2004
Modified by dplatt at 7:43 AM 5/21/2004
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dplatt »</TD></TR><TR><TD CLASS="quote">
D16Z Fully Built Honda Hydro Transmission, only 3 months old...bulletproof! Only $1200
-Quaife Differential, Brand New Cryo Treated Gears, Brand New Cryo Treated Syncros, Cryo Treated Shift Forks, Cryo Treated Shafts, and Brand New Bearings (cost $2500 to do yourself).
</TD></TR></TABLE>
D16Z Fully Built Honda Hydro Transmission, only 3 months old...bulletproof! Only $1200
-Quaife Differential, Brand New Cryo Treated Gears, Brand New Cryo Treated Syncros, Cryo Treated Shift Forks, Cryo Treated Shafts, and Brand New Bearings (cost $2500 to do yourself).
</TD></TR></TABLE>
Nice, isn't it? It would sell like hot cakes if there were more hard core D16Z racers.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BLiTZ BLuE CiViC »</TD></TR><TR><TD CLASS="quote">wish you still had that cam and gear
still nice prices
bump
</TD></TR></TABLE>
Yeah, both pieces went for more than listed (ended in bidding war). Still lots of cool stuff at great prices. I'm surprised that there isn't a D16Z enthusiast that hasn't picked up that tranny yet. My brother's D16Z powered EX Coupe ran a 14.52s 1/4 mile (stock block, normally aspirated), but it was tearing through trannsmissions like mad. After eight tranny's, he built this one to last, but then blew the motor 3 months later from a cracked valve retainer. With anyone in the same boat, take his advice: This built tranny is well worth the money in the long-run.
still nice prices
bump
</TD></TR></TABLE>Yeah, both pieces went for more than listed (ended in bidding war). Still lots of cool stuff at great prices. I'm surprised that there isn't a D16Z enthusiast that hasn't picked up that tranny yet. My brother's D16Z powered EX Coupe ran a 14.52s 1/4 mile (stock block, normally aspirated), but it was tearing through trannsmissions like mad. After eight tranny's, he built this one to last, but then blew the motor 3 months later from a cracked valve retainer. With anyone in the same boat, take his advice: This built tranny is well worth the money in the long-run.
Trending Topics
The ITR brake conversion includes the front set of knuckle/hub assemblies, front calipers, front rotors, and front pads. The suspension also includes the front shocks and springs, forks, upper arms, lower arms, and radius arms. I have the entire front suspension from a JDM 97 Integra Type R, so let me know if you are interested in any other parts. The pads and rotors have very little use on them. I think the only think that I don't have is the front sway bar (I used that part).
Modified by dplatt at 8:29 PM 3/30/2004
Modified by dplatt at 8:40 PM 3/30/2004
Modified by dplatt at 8:41 PM 3/30/2004
Modified by dplatt at 8:29 PM 3/30/2004
Modified by dplatt at 8:40 PM 3/30/2004
Modified by dplatt at 8:41 PM 3/30/2004
More parts sold, but more left. Dropped prices more & added STR fuel rail.


