C-SPEED Integra track results
We finally hit the track yesterday for the first time on the new motor. Running on DOT rubber, untuned suspension, and stock intake/filter, we managed to make consistent runs with the best being:
60': 2.16
330: 5.838
1/8: 8.788@82.79mph
1000: 11.307
1/4: 13.448@105.44
I felt that the 60' time could have been improved and i'm sure with a different intake and larger injectors, some more power can still be extracted from the motor as-is. Keep in mind the car is 100% NA now.
We're sitting right around where we were predicting the car would run at.. perhaps a little more optimistic at 13.30s but I'm sure we're there with a little more fine adjustments.
Hopefully we'll be able to improve the times before the season ends and hit 12's again on slicks this year. We're knocking right on the door.
Thanks to our sponsors for taking us this far is such a short period of time esp. since our original motor for this year blew up early in the season.
Thanks!
60': 2.16
330: 5.838
1/8: 8.788@82.79mph
1000: 11.307
1/4: 13.448@105.44
I felt that the 60' time could have been improved and i'm sure with a different intake and larger injectors, some more power can still be extracted from the motor as-is. Keep in mind the car is 100% NA now.
We're sitting right around where we were predicting the car would run at.. perhaps a little more optimistic at 13.30s but I'm sure we're there with a little more fine adjustments.
Hopefully we'll be able to improve the times before the season ends and hit 12's again on slicks this year. We're knocking right on the door.

Thanks to our sponsors for taking us this far is such a short period of time esp. since our original motor for this year blew up early in the season.
Thanks!
Well, you know you're already there with slicks a decent intake, and a gutted rear interior ...... but if you are trying to do it on streets and full interior ..... might have some work cut out for you!
2.1 on street rubber is pretty damn good! Unless of course your DOT rubber are DOT approved racing radials .......
Nice work, keep it up!
2.1 on street rubber is pretty damn good! Unless of course your DOT rubber are DOT approved racing radials .......
Nice work, keep it up!
Trending Topics
Well, you know you're already there with slicks a decent intake, and a gutted rear interior ...... but if you are trying to do it on streets and full interior ..... might have some work cut out for you!
2.1 on street rubber is pretty damn good! Unless of course your DOT rubber are DOT approved racing radials .......
Nice work, keep it up!
2.1 on street rubber is pretty damn good! Unless of course your DOT rubber are DOT approved racing radials .......
Nice work, keep it up!
Very nice.
YahOOO!!! Good work man!!
Damn my car is slow
Damn my car is slow
Thread
Thread Starter
Forum
Replies
Last Post
philipwight
Drag Racing
11
May 17, 2005 05:40 PM




