i was wondering if these two are the same. also, will the ctr lsd bolt on to a gsr tranny with no additional hardware? i searched the archives and found that the usdm itr will, but i couldnt find if the jdm ctr or itr is a direct bolt on. thanks.

 

Yes, all of them will fit into a GSR tranny.

 

Will they both work with a b16 tranny too? I believe they would but I would love some assurances.

 

Well yea it fits.. I don't know if the ring gear and fd will work. Make sure you get new bearings and a shim for it.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Nameless EJ6 &raquo;</TD></TR><TR><TD CLASS="quote">Well yea it fits.. I don't know if the ring gear and fd will work. Make sure you get new bearings and a shim for it.</TD></TR></TABLE>

Thats really what I was asking....I wanted to know if you can use the stock b16 ring gear

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bitzbp &raquo;</TD></TR><TR><TD CLASS="quote">

Thats really what I was asking....I wanted to know if you can use the stock b16 ring gear</TD></TR></TABLE>

buy the ITR final gear as well... this topic been covered before

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bitzbp &raquo;</TD></TR><TR><TD CLASS="quote">

Thats really what I was asking....I wanted to know if you can use the stock b16 ring gear</TD></TR></TABLE> not likely. its been covered before.... the B16 fd ring gear has a different thru hole size (smaller) compred to the ITR/CTR units.

so to use a CTR/ITR lsd in a B16 tranny, you need the CTR/ITR fd ring gear as well.