like the title says..im looking for the ABDC valve closing degree for all the stages of skunk2s and the spoon cams. thanks.

 

anyone pleeeez

 

for the night crew

 

 

Try e-mailing the manufactures

The skunk2 ABDC specs are all over on TI

 

SUPPOSEDLY the skunk2 1s are 43 degrees.. and the 2s are 49. No VALID sources were given. the 1s seem a little odd to me since the ITRs ABDC degree is 45.

 

i also emailed skunk2 and a bunch of big people like DPR, Joe alaniz, prospeed, import builders....no response from skunk2 and the rest of them dont know the specs.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DefiantGSR &raquo;</TD></TR><TR><TD CLASS="quote">SUPPOSEDLY the skunk2 1s are 43 degrees.. and the 2s are 49. No VALID sources were given. the 1s seem a little odd to me since the ITRs ABDC degree is 45. </TD></TR></TABLE>

I think it could be taken at 1mm lift or something and the oem ones are at 0 lift. I see a lot of skunk2 owners here, some one gotta have a data sheet.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fox297 &raquo;</TD></TR><TR><TD CLASS="quote">

I think it could be taken at 1mm lift or something and the oem ones are at 0 lift. I see a lot of skunk2 owners here, some one gotta have a data sheet.</TD></TR></TABLE>

thats what im sayin'..

maybe this will help: ABDC Closing = Intake Cam Duration - Intake Valve Opening
&gt; Crank Angle BTDC - 180


Modified by DefiantGSR at 6:28 PM 2/4/2004