Anyone know?

The 4 spot welds are drilled out on both ends of the door...

any tips on how to get the adhesive off?
anything else i need to do?

Thanks in advance

It's for my friends race car so no worries on saftey... thanks

 

HUGE hammer

i have never done it before, but im sure the hammer will come in handy at some point.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mansonclubpuir &raquo;</TD></TR><TR><TD CLASS="quote">HUGE hammer

i have never done it before, but im sure the hammer will come in handy at some point. </TD></TR></TABLE>

hah yeah i have one lying around....

anyone know for sure?

 

Heat it up with a heat gun and try pulling it off. Also I hope its a race car with a cage at least..cause it would be scurry to get hit at the side with a car with out a cage or door beam

 

Didn't the HF's have no support beams in the door? I thought that was one of the reasons they were so light?

 

They are a real bitch man..... try to get a new blade form a xcato (sp) knife my brother and I used that and a screw driver. HTH Rob

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AnitRiceSuperStar &raquo;</TD></TR><TR><TD CLASS="quote">Heat it up with a heat gun and try pulling it off. Also I hope its a race car with a cage at least..cause it would be scurry to get hit at the side with a car with out a cage or door beam</TD></TR></TABLE>

hmmm yeah i'll try that ....


<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sircrxracer &raquo;</TD></TR><TR><TD CLASS="quote">They are a real bitch man..... try to get a new blade form a xcato (sp) knife my brother and I used that and a screw driver. HTH Rob</TD></TR></TABLE>

??? how did he do that?