Ok i narrowed it down to the drivers side axle. When i got my swap they used my accord axles and shaft with the h22 tranny. I have noticed when i hit a bump i feel a vibration from the divers side axle. I jacked my car up and noticed the hub (or clyinder looking thing with rubber boot on it) was moving left and right. So i slid it to the right and it seemed to click in. Then i thought hmm maybe they just didnt click it in. I go driving feels fine for about 5 min. Then vibration starts occuring again. Look again and this hub thing moved to the left again. What could be causing this maybe they froggot to tighten something inside the boot. PLease help im not to good with axles and could use all your help. From what i have read this is not supposed to move left and right. My passenger side doesnt move at all.

 

It sounds like they left an axle nut loose/off. Is it on the outboard side (wheel) or inboard that you are able to move it.

 

its the one nearest to the tranny. I just found grease slung everywere

 

your axles seems to be to short maybe.

 

maybe the axle somehow got crooked, maybe when they swapped the motor somebody ran it over in the middle of the axle?