I need to know if the leather tones match the RSX wheel....I am pretty sure the air bag will wokr ok but the shades of black look a little different.

 

please by mor specific...honda airbag??/ steering wheel air bag? passenger front airbag? driver side airbag? passenger side air bag?...which one are you talkin about

 

I'm looking for the drivers side steering wheel air bag,
Sorry for the lack of 411.

 

Why not just get the whole steering wheel?

 

I think just the air bag will do, I want to completely turn the RSX into an Integra, But my air bag has the "A" in the center.

 

dont they have an H to place where the A is? dont the ephatch guys have a thread to do that?

 

The H from the steering wheel might be the same size as the H emblem that goes on the back, AJ racing might be able to know, give them a call

 

Greenbean, are you going to take out the doorsills out as well?

The front floormats I believe says RSX Type S on it too.

 

It is a pain to swap out the A and H , there was a write up on CRSX and it wasnt easy...better off going with the JDM wheel or just getting an EP3 Si airbag...

 

Well I've already gotten rid of the factory mats...I have the door sill stickers removed, they are just aluminum plates that say RSX...
I can purchase an S2K air bag or the EP3 air bag for not to much. I just want to see one in another car before I commit.

 

the JDM H will not fit in your rsx steering wheel.. the bottom part will stick out.. you're far better off buying the whole srs steering wheel

 

Greenbean, are there holes left behind after you take the "RSX" emblem off the door sill?

 

No, just be really careful trying to get en edge on the plate, I used a pick from a set of Craftsmen picks I have. Funny thing is the plastic has "RSX" molded into it under the silver plate.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by GreenBean &raquo;</TD></TR><TR><TD CLASS="quote">No, just be really careful trying to get en edge on the plate, I used a pick from a set of Craftsmen picks I have. Funny thing is the plastic has "RSX" molded into it under the silver plate.</TD></TR></TABLE>

Sounds good, keep us posted on the conversion, pics would be bonus

 

Ohea, I'm almost a pro with my Canon A70, I'll post them as I go.