i do the short version.....raining.......wheel turned......kepped going straight.....wheel hit curb diagngoly.....ok i raised the car up nothing look bent. but with wheel straight my drivers wheel in the front is off. so thats toe, mabe tie rod?
and bottom of wheel mabe pushed in a 1/4 -1\2 inch, barely obvious, i dont feel safe driving it becuse the toe is messed up that much, what parts would yall put on to fix it? oh its an 88 crx si

 

anybody?

 

well it seither the out tie rod first guess (cheapest to do) or the knuckle ( expensive to do)

 

im going to the junk yard so i might get both, but..........i know theres more than just one thing

 

I would say depends on how hard you hit the curb? most likly tie-rod. Rob

 

Well you can also go get the alignment checked at a front end shop. alot of them will do the inspection for free and give you a alignment spec sheet and list of whats bent

 

see my problem is i dont know rex's that well. im a bmw mechic so i know the jist, but honda are completely different beast's......amd i was only going 5-10 mph if that

 

Start with the tie rod end, the take it to get aligned if it still out then take it to a frontend shop and get an estimate and some ideas where to continue replacing parts.