FS: Testing Waters...B16A2 JRSC w/ MAP Controller, Boost Timiing Controller, FMU,...
Thread Starter
Joined: Mar 2002
Posts: 267
Likes: 0
From: NapTownSi, MD
FS: B16A2 JRSC w/ MAP Controller, Boost Timiing Controller, FMU,...
I will be returning to NA and will be selling my JRSC setup for my 99 Si. I have decided, after receiving several offers, to give this setup away for $1650+shipping firm.
I will be building a turbo setup once I am back to stock. There are approximately 30,000 miles on the charger, but only 5,000 on the stepper pulley upgrade. This has been run on a Hondata tuned motor, so it is definitely reliable. The setup w/ 2.5" exhaust got me through the traps on a fully daily driven, full interior, etc. Si in 14.0 @ 100.3mph. Obviously, this is a 13sec. setup and fun as hell to drive to the grocery store! Included in the setup would be the following:
-JRSC Kit w/ 6psi pulley (all brackets, idler pulleys, nuts, bolts, etc.)
-Motorvation Motorsports Stepper Pulley (similar to Endyn, but better!!) ~9psi
-JR FMU
-JR MAP Controller (minus the plate/spacer that goes over the oem MAP sensor)
-JR Boost Timing Controller
-Ceramic Kamikaze 4-1 Header w/ 2.5" collector
-Installation instructions for each JR component.
...I won't include any gaskets (throttle body, IM, SC) because you get those from your Honda dealer and/or call Keith at Moss Motorsports (he is really helpful and will hook you up with whatever parts you may need for installation).
For questions or comments, please don't hesitate to IM, email or post. I will try to check this frequently.
-Mark
Modified by NapTownSi at 10:44 PM 1/20/2004
I will be building a turbo setup once I am back to stock. There are approximately 30,000 miles on the charger, but only 5,000 on the stepper pulley upgrade. This has been run on a Hondata tuned motor, so it is definitely reliable. The setup w/ 2.5" exhaust got me through the traps on a fully daily driven, full interior, etc. Si in 14.0 @ 100.3mph. Obviously, this is a 13sec. setup and fun as hell to drive to the grocery store! Included in the setup would be the following:
-JRSC Kit w/ 6psi pulley (all brackets, idler pulleys, nuts, bolts, etc.)
-Motorvation Motorsports Stepper Pulley (similar to Endyn, but better!!) ~9psi
-JR FMU
-JR MAP Controller (minus the plate/spacer that goes over the oem MAP sensor)
-JR Boost Timing Controller
-Ceramic Kamikaze 4-1 Header w/ 2.5" collector
-Installation instructions for each JR component.
...I won't include any gaskets (throttle body, IM, SC) because you get those from your Honda dealer and/or call Keith at Moss Motorsports (he is really helpful and will hook you up with whatever parts you may need for installation).
For questions or comments, please don't hesitate to IM, email or post. I will try to check this frequently.
-Mark
Modified by NapTownSi at 10:44 PM 1/20/2004
Joined: Dec 2003
Posts: 511
Likes: 0
From: Pittsburgh, PA
Re: FS: Testing Waters...B16A2 JRSC w/ MAP Controller, Boost Timiing Controller, FMU,... (NapTownSi)
What are you looking to get out of it.. I'm very interested in it... I pm you... Probably be able to pick up too...
Thread Starter
Joined: Mar 2002
Posts: 267
Likes: 0
From: NapTownSi, MD
Re: FS: Testing Waters...B16A2 JRSC w/ MAP Controller, Boost Timiing Controller, FMU,... (busakiller
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by busakiller »</TD></TR><TR><TD CLASS="quote">What are you looking to get out of it.. I'm very interested in it... I pm you... Probably be able to pick up too... </TD></TR></TABLE>
replied. up
replied. up
Trending Topics
Thread Starter
Joined: Mar 2002
Posts: 267
Likes: 0
From: NapTownSi, MD
Re: FS: Testing Waters...B16A2 JRSC w/ MAP Controller, Boost Timiing Controller, FMU,... (busakiller
I've told a few people inquiring about the setup that I am now taking offers. I don't want to post an asking price because I'm in no rush to get rid of it. If an attractive offer comes my way, I would be more inclined to sell sooner rather than later. In other words, I'm open to offers.
-Mark
-Mark
Thread
Thread Starter
Forum
Replies
Last Post
PickleTeg
Classifieds: Forced Induction
5
Sep 7, 2006 01:37 PM
