got this today. i know nothing about it HELP
Thread Starter
Honda-Tech Member
Joined: Apr 2003
Posts: 998
Likes: 0
From: Ottawa, Ontario, Canada
got this today. i know nothing about it HELP
hey guys
i just picked this up today for $80cdn. i know its nissan but anyone know what engine. and what flange it would have?. i wanna put it on my b16
i just picked this up today for $80cdn. i know its nissan but anyone know what engine. and what flange it would have?. i wanna put it on my b16
Trending Topics
Joined: Apr 2002
Posts: 3,523
Likes: 0
From: W.A
Re: got this today. i know nothing about it HELP (mitsuman)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by mitsuman »</TD></TR><TR><TD CLASS="quote">ya t3 flange. looks just like the flange on my t3 sittin right next to me</TD></TR></TABLE>
and the one on my gagage
and the one on my gagage
Honda-Tech Member
Joined: Sep 2002
Posts: 5,517
Likes: 1
From: ME
Re: got this today. i know nothing about it HELP (b16ahybrid)
T25 turbine inlet looks almost the same as a T3. The diff is not nearly as obvious as a t3 vs t4. The t25 has the same proportions as t3 but is slightly smaller.
The bolt holes are 2.87" apart on the T25 and 3.37" on the T3. Nissan used a bunch of different t25s on the SR motors...
The bolt holes are 2.87" apart on the T25 and 3.37" on the T3. Nissan used a bunch of different t25s on the SR motors...
Re: got this today. i know nothing about it HELP (Bailhatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bailhatch »</TD></TR><TR><TD CLASS="quote">T25 turbine inlet looks almost the same as a T3. The diff is not nearly as obvious as a t3 vs t4. The t25 has the same proportions as t3 but is slightly smaller.
The bolt holes are 2.87" apart on the T25 and 3.37" on the T3. Nissan used a bunch of different t25s on the SR motors...</TD></TR></TABLE>
for knowledge
The bolt holes are 2.87" apart on the T25 and 3.37" on the T3. Nissan used a bunch of different t25s on the SR motors...</TD></TR></TABLE>
for knowledge
Member
Joined: Jun 2002
Posts: 1,148
Likes: 0
From: Hot Hot Heat, AZ
Re: got this today. i know nothing about it HELP (nitekidsef9)
if its a T3 (hard to tell) its probably a straight T3 with a 60 trim compressor wheel from the 280ZX-T if i had to guess.....and i forgot what the turbine wheel and AR where 
Honda-Tech Member
Joined: Sep 2002
Posts: 5,517
Likes: 1
From: ME
Re: got this today. i know nothing about it HELP (Full-Race Javier)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Full-Race Javier »</TD></TR><TR><TD CLASS="quote">if its a T3 (hard to tell) its probably a straight T3 with a 60 trim compressor wheel from the 280ZX-T if i had to guess.....and i forgot what the turbine wheel and AR where </TD></TR></TABLE>
that could be it, forgot about that one myself. nice JY turbo if it is.
</TD></TR></TABLE>that could be it, forgot about that one myself. nice JY turbo if it is.
Thread Starter
Honda-Tech Member
Joined: Apr 2003
Posts: 998
Likes: 0
From: Ottawa, Ontario, Canada
Re: got this today. i know nothing about it HELP (Bailhatch)
sweet guys Great info!
the turbo seems to good to be true. no shaft play what so ever. and the fins look pretty mint
any hp gueses with a B16 running a itr int man and t/b with stge 4 hondata?
the turbo seems to good to be true. no shaft play what so ever. and the fins look pretty mint
any hp gueses with a B16 running a itr int man and t/b with stge 4 hondata?
Honda-Tech Member
Joined: Sep 2002
Posts: 3,532
Likes: 1
From: Alexandria, Va, USA
Re: got this today. i know nothing about it HELP (Full-Race Javier)
It isn't a nissan T25 or T28 most of them have differant intake flanges on them, It looks like a Super 60 T3 off of a 300zx
Thread
Thread Starter
Forum
Replies
Last Post